Please remove my email address......

elisabeth gerics

New member
Sep 29, 2017
1
0
0
......no offense, but this is too much mechanical gibber-jabber for me.
I was hoping more for a "where go you like to go camping" kind of blog.
Thanks much!

>
> I seems to recall issues of fatigue failures caused by heavy senders
> threaded into brass tee fittings in a high-vibration environment.
> Considering the consequences of such, I built my tee using high-pressure
> steel fittings, which are forged and strong. They are also available at
> McMaster-Carr.
>
> I have one connection to a tube compression fitting that goes to my
> mechanical gauge, and the other for a cutoff switch for the electric fuel
> pump. I wouldn't be afraid to stack another tee for an idiot light sender,
> but it would be just as easy to wire the warning light to the fuel pump
> wire using a relay to reverse the voltage.
>
> Rick "who has an Equus digital gauge but has never installed it" Denney
>

>>
>> Bruce,
>>
>> Thanks!
>>
>> Found it: https://www.mcmaster.com/#50785k222/=19lbwcd
>>
>> Regards,
>> Rob M.
>> The Pedantic Mechanic
>> Sydney, Australia
>> AUS '75 Avion - The Blue Streak TZE365V100428
>> USA '75 Avion - Double Trouble TZE365V100426
>> USA '77 Kingsley - TZE 267V100808
>>
>>
>> -----Original Message-----
>> From: Gmclist [mailto:gmclist-bounces] On Behalf Of Bruce
>> Hislop
>> Sent: Thursday, September 28, 2017 8:55 PM
>> To: gmclist
>> Subject: Re: [GMCnet] Gauges
>>
>> Rob,
>> FYI, I found a single fitting that allowed 2 oil pressure gauges to be
>> mounted in the same place on my 455.
>>
>>
>> http://www.gmcmhphotos.com/photos/misc/p63220-mounting-dual-oil-pressure-sendors.html
>>
>> here is the fitting itself:
>>
>> http://www.gmcmhphotos.com/photos/misc/p63221-mounting-dual-oil-pressure-sendors.html
>>
>> Bruce Hislop
>>
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
> --
> Rick Denney
> 73 x-Glacier 230 "Jaws"
> Off-list email to rick at rickdenney dot com
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
 
Actually a separate GMC forum for camping, routes, rally's, and recommended must see's would be a good idea.
It might already be going on somewhere in the interweb..
--
Scott Nutter
1978 Royale Center Kitchen, Patterson 455, switch pitch tranny, 3.21 final drive, Quad bags, tankless water heater, everything Lenzi.
Houston, Texas
 
I expect it would attract a following if someone were to undertake it.

--johnny
--
76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
"I forgive them all, save those who hurt the dogs. They must answer to me in hell" - ol Andy, paraphrased
 
Doesn't it already exist? Facebook?
Jim Hupy
Salem, Or
78 GMC ROYALE 403

On Sep 29, 2017 9:13 AM, "Johnny Bridges via Gmclist" <

I expect it would attract a following if someone were to undertake it.

--johnny
--
76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
"I forgive them all, save those who hurt the dogs. They must answer to me
in hell" - ol Andy, paraphrased

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
 
Go to the GMC facebook site. They are pretty much non-technical Or marginally technical and accurate. Usually a lot more pictures and social stuff
there.

Come back here if you have a GMC Coach related question or contribution.
--
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
 
I don't know. Lately some of the Facebook sites have become a conglomeration of too many "Indian Chiefs" sniping at each other. If rather stay here!
At least people are respectful.
--
Brian K
1977 Eleganza II, TZE167V100261
Bellevue, WA
Rebuilt 455, New brake system, a lot of Original Equipment ready to fall apart (discovering more as I go along....)
 
Brian,

As we say down under; "too right, Mate!"

Gene,

That's one of the reasons I quit Facebook.

Regards,
Rob M.
The Pedantic Mechanic
Sydney, Australia
AUS '75 Avion - The Blue Streak TZE365V100428
USA '75 Avion - Double Trouble TZE365V100426
USA '77 Kingsley - TZE 267V100808


-----Original Message-----
From: Gmclist [mailto:gmclist-bounces] On Behalf Of Brian Krikorian
Sent: Saturday, September 30, 2017 11:40 PM
To: gmclist
Subject: Re: [GMCnet] Please remove my email address......

I don't know. Lately some of the Facebook sites have become a conglomeration of too many "Indian Chiefs" sniping at each other. If
rather stay here!
At least people are respectful.
--
Brian K
1977 Eleganza II, TZE167V100261
Bellevue, WA
Rebuilt 455, New brake system, a lot of Original Equipment ready to fall apart (discovering more as I go along....)

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
 
After an email exchange with Bill Massey, I did want to clarify that I shouldn't generalize too much. There are a lot of good posts and visuals at
the Classic GMC Facebook site I was reviewing. Unfortunately I ran into a conversation which was turning personal and ugly (in my view), rather than
just state their opinions and move on.

As I told Bill in my email to him, getting this GMC and learning about it has been a savior for me in many ways. It gets my mind off of work and the
other silly crap going on in this world, and let's me find a way to literally and figuratively escape all that. I hate to see good people, who can
help each other, devolve into petty bickering over something that should bring some relaxation and joy to our lives. But that's me. I'm getting
older, more cynical and more of a curmudgeon, I guess.

This site and many of the others, and many of the individuals including Bill and many of the "senior" members posting on here really are an asset to
the GMC community and truly help "newbies" like me.
--
Brian K
1977 Eleganza II, TZE167V100261
Bellevue, WA
Rebuilt 455, New brake system, a lot of Original Equipment ready to fall apart (discovering more as I go along....)
 
Brien, As an attorney, you have encountered too many of this type of
conversations in your profession.
I'm sure you can realize that one need to separate the bull from useful
information.

> After an email exchange with Bill Massey, I did want to clarify that I
> shouldn't generalize too much. There are a lot of good posts and visuals at
> the Classic GMC Facebook site I was reviewing. Unfortunately I ran into a
> conversation which was turning personal and ugly (in my view), rather than
> just state their opinions and move on.
>
> As I told Bill in my email to him, getting this GMC and learning about it
> has been a savior for me in many ways. It gets my mind off of work and the
> other silly crap going on in this world, and let's me find a way to
> literally and figuratively escape all that. I hate to see good people, who
> can
> help each other, devolve into petty bickering over something that should
> bring some relaxation and joy to our lives. But that's me. I'm getting
> older, more cynical and more of a curmudgeon, I guess.
>
> This site and many of the others, and many of the individuals including
> Bill and many of the "senior" members posting on here really are an asset to
> the GMC community and truly help "newbies" like me.
> --
> Brian K
> 1977 Eleganza II, TZE167V100261
> Bellevue, WA
> Rebuilt 455, New brake system, a lot of Original Equipment ready to fall
> apart (discovering more as I go along....)
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>

--
Jim Kanomata
Applied/GMC, Newark,CA
jimk
http://www.appliedgmc.com
1-800-752-7502