OTC 927 orders

[thomas g. warner]

Here is a copy of the e-mail I sent Fred Keppers to order the OTC-927 for
those people that sent me $180 instead of $100. It was sent to Fred on
5/27/99. By now everyone should have got their tools (the one for the puller)
And if you did not please don't e-mail me call Fred at thephone number I
gave everyone.

Hey Fred the e-mail address you gave me was incorrect. You spelled
toolsource wrong!
>Date: Thu, 27 May 1999 10:10:04
>To: "FRED B KEPPERS"
>From: Tom Warner
>Subject: Re: otc #927 shippments
>
>Fred I want you to ship one OTC-927 puller set to each of the following
addresses, for a total of 7 sets. They will be charged to my VISA card, the
number of which I will give you over the phone.
>
>1. Richard A. Bachert 4053 Glen Meadow Dr.
> Norcross, GA 30092
>
>2. Thom Hole 6525 Whitted Rd
> Fuquay, NC 27526
>
>3. G.M. Hope 1930 SW 19th Way
> Gainesville, FL 32608
>
>4. Dave Markus 6806 Jackson
> Ann Arbor, MI. 48103
>
>
>5. Marcus McGee 149 Anderson Ave.
> Rochester, NY 14607
>
>6. Mark Millstein 36 Hazzard Road
> Lido Beach, New York 11561
>
>7. Peter Papas 57 Creek Bluff Way
> Ormond Beach, Florida 32174-6721
>
>Tom Warner
>315-829-3398
>
>
>
>
>
>
>
>
Tom & Marg Warner
Vernon Center NY
1976 palmbeach
"The beautiful Mohawk Vally"

 

[zachary zehnacker]

Tom,

Is there a time limit on ordering the OTC tool from Fred? We were going
to wait until you sent the bearing tool before we ordered the OTC for it.
Can we do that or do we need to order the OTC now from Fred to get the low
price?

Thanks,
Zak

>5/27/99. By now everyone should have got their tools (the one for the
puller)
>And if you did not please don't e-mail me call Fred at thephone number I
>gave everyone.

 

[thomas g. warner]

I would order the otc from fred now as he may be back ordered on them. No
dealer stocks 50-60 otc 927s. that is probably a 5 year supply for him

>Tom,
>
> Is there a time limit on ordering the OTC tool from Fred? We were going
>to wait until you sent the bearing tool before we ordered the OTC for it.
>Can we do that or do we need to order the OTC now from Fred to get the low
>price?
>
> Thanks,
> Zak
>
>

>>5/27/99. By now everyone should have got their tools (the one for the
>puller)
>>And if you did not please don't e-mail me call Fred at thephone number I
>>gave everyone.
>
>
>
Tom & Marg Warner
Vernon Center NY
1976 palmbeach
"The beautiful Mohawk Vally"

 

[heinz wittenbecher]

Tom,

Apologies if I missed the details re getting the OTC 927.
Could you please post details or email me so that I'll be sure to have the
"set" when needed.
BTW, no panic re shipping as I hope to be a 'ways away from FB's yet

TIA - Heinz

- ----- Original Message -----
From: Tom Warner
To:
Sent: Thursday, June 10, 1999 4:05 AM
Subject: Re: GMC: OTC 927 orders

> I would order the otc from fred now as he may be back ordered on them. No
> dealer stocks 50-60 otc 927s. that is probably a 5 year supply for him
>
>

> >Tom,
> >
> > Is there a time limit on ordering the OTC tool from Fred? We were going
> >to wait until you sent the bearing tool before we ordered the OTC for it.
> >Can we do that or do we need to order the OTC now from Fred to get the
low
> >price?
> >
> > Thanks,
> > Zak
> >
> >

> >>5/27/99. By now everyone should have got their tools (the one for the
> >puller)
> >>And if you did not please don't e-mail me call Fred at thephone number I
> >>gave everyone.
> >
> >
> >
> Tom & Marg Warner
> Vernon Center NY
> 1976 palmbeach
> "The beautiful Mohawk Vally"
>
>

 

[thomas g. warner]

Heinz order it from: 1-800-344-9777 Fred Keppers. Copst for the OTC-927 is
$75 plus shipping.

>Tom,
>
>Apologies if I missed the details re getting the OTC 927.
>Could you please post details or email me so that I'll be sure to have the
>"set" when needed.
>BTW, no panic re shipping as I hope to be a 'ways away from FB's yet
>
>TIA - Heinz
>
>
>----- Original Message -----
>From: Tom Warner
>To:
>Sent: Thursday, June 10, 1999 4:05 AM
>Subject: Re: GMC: OTC 927 orders
>
>
>> I would order the otc from fred now as he may be back ordered on them. No
>> dealer stocks 50-60 otc 927s. that is probably a 5 year supply for him
>>
>>

>> >Tom,
>> >
>> > Is there a time limit on ordering the OTC tool from Fred? We were going
>> >to wait until you sent the bearing tool before we ordered the OTC for it.
>> >Can we do that or do we need to order the OTC now from Fred to get the
>low
>> >price?
>> >
>> > Thanks,
>> > Zak
>> >
>> >

>> >>5/27/99. By now everyone should have got their tools (the one for the
>> >puller)
>> >>And if you did not please don't e-mail me call Fred at thephone number I
>> >>gave everyone.
>> >
>> >
>> >
>> Tom & Marg Warner
>> Vernon Center NY
>> 1976 palmbeach
>> "The beautiful Mohawk Vally"
>>
>>
>
>
>
Tom & Marg Warner
Vernon Center NY
1976 palmbeach
"The beautiful Mohawk Vally"