Onan Start Problem

[hemogoblin]

I had exactly that problem, which eventually resulted in a "no start from
remote". With help from this forum, problem was corroded connector at rear
of gen compartment. This can be seen when gen pulled all the way out on
slides. Clean or replace connector. These wires go to the inside remote
start and hour meter.
MARK '77 Palm Beach
HEMOGOBLIN's.com

 

[gary miller]

Mark:
Many thanks for your suggestion to look @ the connector. It is not in an
obvious place. I found that mine was only partially inserted; took it apart
and blew it out, put it all the way together and now everything wowrks fine.
Thanks!!!!
Gary '77 Kingsley Oregon

> I had exactly that problem, which eventually resulted in a "no start from
> remote". With help from this forum, problem was corroded connector at rear
> of gen compartment. This can be seen when gen pulled all the way out on
> slides. Clean or replace connector. These wires go to the inside remote
> start and hour meter.
> MARK '77 Palm Beach
> HEMOGOBLIN's.com