i spent some time on Smokstack.com where they REALLY understand generators. I probably need the board and the voltage regulator but we've determined
the windings are good so i'll be into this about $500 for a pretty good generator.
I have a 23 footer with the smaller generator space. The rails are still in place. I plan to move the high one down to the bottom of the shelf and
make a slide out.
This will allow pretty good access to the engine but not much to the generator side.
Turns out all the emeralds are the same size so there are 6K Emerals 3's out there, some with 240V.
--
Dave & Ellen Silva
1972 Revcon Olds 455, toro drive train. All Stock
the windings are good so i'll be into this about $500 for a pretty good generator.
I have a 23 footer with the smaller generator space. The rails are still in place. I plan to move the high one down to the bottom of the shelf and
make a slide out.
This will allow pretty good access to the engine but not much to the generator side.
Turns out all the emeralds are the same size so there are 6K Emerals 3's out there, some with 240V.
--
Dave & Ellen Silva
1972 Revcon Olds 455, toro drive train. All Stock
