OEM copper cv bands
- Thread starter charles boyd
- Start date
I don’t remember exactly how but if I recall they had a loose fitting copper band and then ekectrucakkt induced a current into it which caused it to shrink tightly around the boot.
Does anyone know where this might be written up?
Emery Stora
77 Kingsley
Frederick, CO
>
> How did GM get the oem copper one piece bands on?
> --
> C. Boyd
> 76 Crestmont
> East Tennessee
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Does anyone know where this might be written up?
Emery Stora
77 Kingsley
Frederick, CO
>
> How did GM get the oem copper one piece bands on?
> --
> C. Boyd
> 76 Crestmont
> East Tennessee
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Chuck,
It was about this time that I saw a demonstration of both an electo-magnetic process and a mechanical process for doing this kind of thing. I believe
I heard the EM people telling others that they had sold some to GM.
Matt
--
Matt & Mary Colie - Members GMCMI, GMCGL, GMCES
'73 Glacier 23 - Still Loving OE Rear Drum Brake with Applied Control Arms
Now with both true Keyless and remote entry
SE Michigan - Twixt A2 and Detroit
It was about this time that I saw a demonstration of both an electo-magnetic process and a mechanical process for doing this kind of thing. I believe
I heard the EM people telling others that they had sold some to GM.
Matt
--
Matt & Mary Colie - Members GMCMI, GMCGL, GMCES
'73 Glacier 23 - Still Loving OE Rear Drum Brake with Applied Control Arms
Now with both true Keyless and remote entry
SE Michigan - Twixt A2 and Detroit
Chuck,
IIRC, this is how they did it:
https://en.wikipedia.org/wiki/Electromagnetic_forming
Ken H.
On Fri, Nov 18, 2016 at 5:50 PM, Charles Boyd
wrote:
> How did GM get the oem copper one piece bands on?
> --
> C. Boyd
> 76 Crestmont
> East Tennessee
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
IIRC, this is how they did it:
https://en.wikipedia.org/wiki/Electromagnetic_forming
Ken H.
On Fri, Nov 18, 2016 at 5:50 PM, Charles Boyd
wrote:
> How did GM get the oem copper one piece bands on?
> --
> C. Boyd
> 76 Crestmont
> East Tennessee
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
That doesn't look like something I can do on the RV pad in the yard. Wrap-Lok is gonna be the move.
--johnny
--
'76 23' transmode Norris upfit, 76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
"Sometimes I wonder what tomorrow's gonna bring when I think about my dirty life and times" --Warren Zevon
--johnny
--
'76 23' transmode Norris upfit, 76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
"Sometimes I wonder what tomorrow's gonna bring when I think about my dirty life and times" --Warren Zevon
What you want to use is Band-It straps (5422K53) and buckles (5422K53).
Those are too-large quantities (which I've bought a couple of times), but
the pre-assembled versions should be available at NAPA.
The tool can be as cheap as this:
http://www.oreillyauto.com/site/c/detail/LIS0/30950/N0718.oap?ck=Search_N0718_-1_-1&pt=N0718&ppt=C0374
Ken H.
On Sun, Nov 20, 2016 at 3:37 PM, Johnny Bridges via Gmclist <
>
> That doesn't look like something I can do on the RV pad in the yard.
Wrap-Lok is gonna be the move.
>
> --johnny
> --
> '76 23' transmode Norris upfit, 76 26' Eleganza(?) with beaucoup mods and
add - ons.
> Braselton, Ga.
>
> "Sometimes I wonder what tomorrow's gonna bring when I think about my
dirty life and times" --Warren Zevon
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Those are too-large quantities (which I've bought a couple of times), but
the pre-assembled versions should be available at NAPA.
The tool can be as cheap as this:
http://www.oreillyauto.com/site/c/detail/LIS0/30950/N0718.oap?ck=Search_N0718_-1_-1&pt=N0718&ppt=C0374
Ken H.
On Sun, Nov 20, 2016 at 3:37 PM, Johnny Bridges via Gmclist <
>
> That doesn't look like something I can do on the RV pad in the yard.
Wrap-Lok is gonna be the move.
>
> --johnny
> --
> '76 23' transmode Norris upfit, 76 26' Eleganza(?) with beaucoup mods and
add - ons.
> Braselton, Ga.
>
> "Sometimes I wonder what tomorrow's gonna bring when I think about my
dirty life and times" --Warren Zevon
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
NAPA Clamp #s
UJ-3415 Small clamp
UJ-3416 Large clamp
On Sun, Nov 20, 2016 at 2:09 PM, Ken Henderson
wrote:
> What you want to use is Band-It straps (5422K53) and buckles (5422K53).
> Those are too-large quantities (which I've bought a couple of times), but
> the pre-assembled versions should be available at NAPA.
>
> The tool can be as cheap as this:
> http://www.oreillyauto.com/site/c/detail/LIS0/30950/
> N0718.oap?ck=Search_N0718_-1_-1&pt=N0718&ppt=C0374
>
> Ken H.
>
>
> On Sun, Nov 20, 2016 at 3:37 PM, Johnny Bridges via Gmclist <
> >
> > That doesn't look like something I can do on the RV pad in the yard.
> Wrap-Lok is gonna be the move.
> >
> > --johnny
> > --
> > '76 23' transmode Norris upfit, 76 26' Eleganza(?) with beaucoup mods and
> add - ons.
> > Braselton, Ga.
> >
> > "Sometimes I wonder what tomorrow's gonna bring when I think about my
> dirty life and times" --Warren Zevon
> >
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> > http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Bruce Hart
1976 Palm Beach
Milliken, Co
GMC=Got More Class
UJ-3415 Small clamp
UJ-3416 Large clamp
On Sun, Nov 20, 2016 at 2:09 PM, Ken Henderson
wrote:
> What you want to use is Band-It straps (5422K53) and buckles (5422K53).
> Those are too-large quantities (which I've bought a couple of times), but
> the pre-assembled versions should be available at NAPA.
>
> The tool can be as cheap as this:
> http://www.oreillyauto.com/site/c/detail/LIS0/30950/
> N0718.oap?ck=Search_N0718_-1_-1&pt=N0718&ppt=C0374
>
> Ken H.
>
>
> On Sun, Nov 20, 2016 at 3:37 PM, Johnny Bridges via Gmclist <
> >
> > That doesn't look like something I can do on the RV pad in the yard.
> Wrap-Lok is gonna be the move.
> >
> > --johnny
> > --
> > '76 23' transmode Norris upfit, 76 26' Eleganza(?) with beaucoup mods and
> add - ons.
> > Braselton, Ga.
> >
> > "Sometimes I wonder what tomorrow's gonna bring when I think about my
> dirty life and times" --Warren Zevon
> >
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> > http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Bruce Hart
1976 Palm Beach
Milliken, Co
GMC=Got More Class
Thank you gentlemen. That was something i have wondered about and couldn't figure it out.
--
C. Boyd
76 Crestmont
East Tennessee
--
C. Boyd
76 Crestmont
East Tennessee
Buckles are 5422K67
bdub
-----Original Message-----
From: Gmclist On Behalf Of Ken Henderson
Sent: Sunday, November 20, 2016 3:10 PM
What you want to use is Band-It straps (5422K53) and buckles (5422K53).
Those are too-large quantities (which I've bought a couple of times), but the
pre-assembled versions should be available at NAPA.
bdub
-----Original Message-----
From: Gmclist On Behalf Of Ken Henderson
Sent: Sunday, November 20, 2016 3:10 PM
What you want to use is Band-It straps (5422K53) and buckles (5422K53).
Those are too-large quantities (which I've bought a couple of times), but the
pre-assembled versions should be available at NAPA.
