nylon air tubing in colors
- Thread starter walter m. drew
- Start date
sometime this winter I am going to replace most if not all of my air tubing
and fittings on my coach. I have been hesitant thus far since I could not
find the tubing in the original colors. Think I have now found it and am
going to contact the company to find out prices. Would anyone else be
interested in getting a complete set of new air lines for their coaches? We
many save a substantial amount of money if we buy in bulk.
The company is Maza Industries in rochester NY and the information is:
http://www.mazzerplastics.com/
Mazzer Nylon Tubing
(Inches)
Ref. Size O.D. Nom. In. I.D. Nom. In. Wall Thickness Nom. In. Min.
Bend Radius In. O.D. Tol. In. I.D. Tol. In. Min. Burst Pressure PSI @
75 deg. F Mazzer Coil Length
2 1/8 .080 .023 .70 +.002-.0045 +/-.004 1000 100, 500, 1000 ft.*
2.5 5/32 .106 .025 .94 +.002-.0045 +/-.004 1000 100, 500, 1000 ft.*
3 3/16 .118 .035 1.1 +.002-.0055 +/-.004 1000 100, 500, 1000 ft.*
4 1/4 .180 .035 1.5 +.002-.0055 +/-.004 1000 100, 500, 1000 ft.**
417 1/4 .170 .040 1.5 +.002-.0055 +/-.004 1200 100, 500, 1000 ft.**
462 1/4 .126 .062 1.5 +.002-.0055 +/-.004 2000 100, 500, 1000 ft.**
5 5/16 .233 .040 1.85 +.002-.0055 +/-.004 1000 100, 500, 1000 ft.**
6 3/8 .275 .050 2.25 +.002-.0055 +/-.004 1000 100, 500, 1000 ft.
8 1/2 .375 .062 3 +.002-.0055 +/-.004 1000 100, 500 ft.
10 5/8 .500 .062 3.75 +/-.004 +/-.004 600 100 ft.
12 3/4 .560 .095 4.5 +/-.004 +/-.004 790 100 ft.
16 1 .750 .125 6 +/-.006 +/-.006 790 100 ft.
Note: Specified minimum bend radius is for minimal tube flattening.
*Reels available up to 5000 feet. **Reels available in 2000 feet.
Colors: Neutral (N), Black (B), Red (R), Blue (BU), Green (G) Yellow (Y),
Orange (OR), Gray (GY).
Call for availability of DOT approved tubing.
Tom & Marg Warner
Vernon Center NY
1976 palmbeach
and fittings on my coach. I have been hesitant thus far since I could not
find the tubing in the original colors. Think I have now found it and am
going to contact the company to find out prices. Would anyone else be
interested in getting a complete set of new air lines for their coaches? We
many save a substantial amount of money if we buy in bulk.
The company is Maza Industries in rochester NY and the information is:
http://www.mazzerplastics.com/
Mazzer Nylon Tubing
(Inches)
Ref. Size O.D. Nom. In. I.D. Nom. In. Wall Thickness Nom. In. Min.
Bend Radius In. O.D. Tol. In. I.D. Tol. In. Min. Burst Pressure PSI @
75 deg. F Mazzer Coil Length
2 1/8 .080 .023 .70 +.002-.0045 +/-.004 1000 100, 500, 1000 ft.*
2.5 5/32 .106 .025 .94 +.002-.0045 +/-.004 1000 100, 500, 1000 ft.*
3 3/16 .118 .035 1.1 +.002-.0055 +/-.004 1000 100, 500, 1000 ft.*
4 1/4 .180 .035 1.5 +.002-.0055 +/-.004 1000 100, 500, 1000 ft.**
417 1/4 .170 .040 1.5 +.002-.0055 +/-.004 1200 100, 500, 1000 ft.**
462 1/4 .126 .062 1.5 +.002-.0055 +/-.004 2000 100, 500, 1000 ft.**
5 5/16 .233 .040 1.85 +.002-.0055 +/-.004 1000 100, 500, 1000 ft.**
6 3/8 .275 .050 2.25 +.002-.0055 +/-.004 1000 100, 500, 1000 ft.
8 1/2 .375 .062 3 +.002-.0055 +/-.004 1000 100, 500 ft.
10 5/8 .500 .062 3.75 +/-.004 +/-.004 600 100 ft.
12 3/4 .560 .095 4.5 +/-.004 +/-.004 790 100 ft.
16 1 .750 .125 6 +/-.006 +/-.006 790 100 ft.
Note: Specified minimum bend radius is for minimal tube flattening.
*Reels available up to 5000 feet. **Reels available in 2000 feet.
Colors: Neutral (N), Black (B), Red (R), Blue (BU), Green (G) Yellow (Y),
Orange (OR), Gray (GY).
Call for availability of DOT approved tubing.
Tom & Marg Warner
Vernon Center NY
1976 palmbeach
Hi Tom, Thanks for the offer. Get the price and then I will be able to know better if it is in my
budget. Thanks Chuck Lompoc, CA 78 Eleganza.
> sometime this winter I am going to replace most if not all of my air tubing
> and fittings on my coach. I have been hesitant thus far since I could not
> find the tubing in the original colors. Think I have now found it and am
> going to contact the company to find out prices. Would anyone else be
> interested in getting a complete set of new air lines for their coaches? We
> many save a substantial amount of money if we buy in bulk.
>
> The company is Maza Industries in rochester NY and the information is:
>
> http://www.mazzerplastics.com/
>
> Mazzer Nylon Tubing
> (Inches)
> Ref. Size O.D. Nom. In. I.D. Nom. In. Wall Thickness Nom. In. Min.
> Bend Radius In. O.D. Tol. In. I.D. Tol. In. Min. Burst Pressure PSI @
> 75 deg. F Mazzer Coil Length
> 2 1/8 .080 .023 .70 +.002-.0045 +/-.004 1000 100, 500, 1000 ft.*
> 2.5 5/32 .106 .025 .94 +.002-.0045 +/-.004 1000 100, 500, 1000 ft.*
> 3 3/16 .118 .035 1.1 +.002-.0055 +/-.004 1000 100, 500, 1000 ft.*
> 4 1/4 .180 .035 1.5 +.002-.0055 +/-.004 1000 100, 500, 1000 ft.**
> 417 1/4 .170 .040 1.5 +.002-.0055 +/-.004 1200 100, 500, 1000 ft.**
> 462 1/4 .126 .062 1.5 +.002-.0055 +/-.004 2000 100, 500, 1000 ft.**
> 5 5/16 .233 .040 1.85 +.002-.0055 +/-.004 1000 100, 500, 1000 ft.**
> 6 3/8 .275 .050 2.25 +.002-.0055 +/-.004 1000 100, 500, 1000 ft.
> 8 1/2 .375 .062 3 +.002-.0055 +/-.004 1000 100, 500 ft.
> 10 5/8 .500 .062 3.75 +/-.004 +/-.004 600 100 ft.
> 12 3/4 .560 .095 4.5 +/-.004 +/-.004 790 100 ft.
> 16 1 .750 .125 6 +/-.006 +/-.006 790 100 ft.
>
> Note: Specified minimum bend radius is for minimal tube flattening.
> *Reels available up to 5000 feet. **Reels available in 2000 feet.
> Colors: Neutral (N), Black (B), Red (R), Blue (BU), Green (G) Yellow (Y),
> Orange (OR), Gray (GY).
> Call for availability of DOT approved tubing.
> Tom & Marg Warner
> Vernon Center NY
> 1976 palmbeach
budget. Thanks Chuck Lompoc, CA 78 Eleganza.
> sometime this winter I am going to replace most if not all of my air tubing
> and fittings on my coach. I have been hesitant thus far since I could not
> find the tubing in the original colors. Think I have now found it and am
> going to contact the company to find out prices. Would anyone else be
> interested in getting a complete set of new air lines for their coaches? We
> many save a substantial amount of money if we buy in bulk.
>
> The company is Maza Industries in rochester NY and the information is:
>
> http://www.mazzerplastics.com/
>
> Mazzer Nylon Tubing
> (Inches)
> Ref. Size O.D. Nom. In. I.D. Nom. In. Wall Thickness Nom. In. Min.
> Bend Radius In. O.D. Tol. In. I.D. Tol. In. Min. Burst Pressure PSI @
> 75 deg. F Mazzer Coil Length
> 2 1/8 .080 .023 .70 +.002-.0045 +/-.004 1000 100, 500, 1000 ft.*
> 2.5 5/32 .106 .025 .94 +.002-.0045 +/-.004 1000 100, 500, 1000 ft.*
> 3 3/16 .118 .035 1.1 +.002-.0055 +/-.004 1000 100, 500, 1000 ft.*
> 4 1/4 .180 .035 1.5 +.002-.0055 +/-.004 1000 100, 500, 1000 ft.**
> 417 1/4 .170 .040 1.5 +.002-.0055 +/-.004 1200 100, 500, 1000 ft.**
> 462 1/4 .126 .062 1.5 +.002-.0055 +/-.004 2000 100, 500, 1000 ft.**
> 5 5/16 .233 .040 1.85 +.002-.0055 +/-.004 1000 100, 500, 1000 ft.**
> 6 3/8 .275 .050 2.25 +.002-.0055 +/-.004 1000 100, 500, 1000 ft.
> 8 1/2 .375 .062 3 +.002-.0055 +/-.004 1000 100, 500 ft.
> 10 5/8 .500 .062 3.75 +/-.004 +/-.004 600 100 ft.
> 12 3/4 .560 .095 4.5 +/-.004 +/-.004 790 100 ft.
> 16 1 .750 .125 6 +/-.006 +/-.006 790 100 ft.
>
> Note: Specified minimum bend radius is for minimal tube flattening.
> *Reels available up to 5000 feet. **Reels available in 2000 feet.
> Colors: Neutral (N), Black (B), Red (R), Blue (BU), Green (G) Yellow (Y),
> Orange (OR), Gray (GY).
> Call for availability of DOT approved tubing.
> Tom & Marg Warner
> Vernon Center NY
> 1976 palmbeach
Arch,
I don't think those push in fittings can be DOT approved. I think
vibrations have more of an affect on them. Of course I have seen people
use plastic versions of these fittings on their race cars for years with no
problems so YMMV
. IMO, these types of fittings are good if you want to
be able to quickly install and remove lines. Since a GMC installation is
somewhat permanent, I would take the extra time to use a more secure
fitting.
Zak
>Went to the site you suggested. WOW talk to them about the Insta-Brass
>fittings. Now that looks good to me!
I don't think those push in fittings can be DOT approved. I think
vibrations have more of an affect on them. Of course I have seen people
use plastic versions of these fittings on their race cars for years with no
problems so YMMV
. IMO, these types of fittings are good if you want tobe able to quickly install and remove lines. Since a GMC installation is
somewhat permanent, I would take the extra time to use a more secure
fitting.
Zak
>Went to the site you suggested. WOW talk to them about the Insta-Brass
>fittings. Now that looks good to me!
Tom
I too am interested in airline tubing in colors
Please advise as to the pricing
Mike Linderman
76 Eleganza II
Ft Wayne, Indiana
- ----- Original Message -----
From: Thomas G. Warner
To:
Sent: Saturday, November 21, 1998 9:45 AM
Subject: GMC: nylon air tubing in colors
>sometime this winter I am going to replace most if not all of my air tubing
>and fittings on my coach. I have been hesitant thus far since I could not
>find the tubing in the original colors. Think I have now found it and am
>going to contact the company to find out prices. Would anyone else be
>interested in getting a complete set of new air lines for their coaches? We
>many save a substantial amount of money if we buy in bulk.
>
>The company is Maza Industries in rochester NY and the information is:
>
>http://www.mazzerplastics.com/
>
>Mazzer Nylon Tubing
>(Inches)
> Ref. Size O.D. Nom. In. I.D. Nom. In. Wall Thickness Nom. In. Min.
>Bend Radius In. O.D. Tol. In. I.D. Tol. In. Min. Burst Pressure PSI @
>75 deg. F Mazzer Coil Length
>2 1/8 .080 .023 .70 +.002-.0045 +/-.004 1000 100, 500, 1000 ft.*
>2.5 5/32 .106 .025 .94 +.002-.0045 +/-.004 1000 100, 500, 1000 ft.*
>3 3/16 .118 .035 1.1 +.002-.0055 +/-.004 1000 100, 500, 1000 ft.*
>4 1/4 .180 .035 1.5 +.002-.0055 +/-.004 1000 100, 500, 1000 ft.**
>417 1/4 .170 .040 1.5 +.002-.0055 +/-.004 1200 100, 500, 1000 ft.**
>462 1/4 .126 .062 1.5 +.002-.0055 +/-.004 2000 100, 500, 1000 ft.**
>5 5/16 .233 .040 1.85 +.002-.0055 +/-.004 1000 100, 500, 1000 ft.**
>6 3/8 .275 .050 2.25 +.002-.0055 +/-.004 1000 100, 500, 1000 ft.
>8 1/2 .375 .062 3 +.002-.0055 +/-.004 1000 100, 500 ft.
>10 5/8 .500 .062 3.75 +/-.004 +/-.004 600 100 ft.
>12 3/4 .560 .095 4.5 +/-.004 +/-.004 790 100 ft.
>16 1 .750 .125 6 +/-.006 +/-.006 790 100 ft.
>
>Note: Specified minimum bend radius is for minimal tube flattening.
>*Reels available up to 5000 feet. **Reels available in 2000 feet.
>Colors: Neutral (N), Black (B), Red (R), Blue (BU), Green (G) Yellow (Y),
>Orange (OR), Gray (GY).
>Call for availability of DOT approved tubing.
>Tom & Marg Warner
>Vernon Center NY
>1976 palmbeach
>
I too am interested in airline tubing in colors
Please advise as to the pricing
Mike Linderman
76 Eleganza II
Ft Wayne, Indiana
- ----- Original Message -----
From: Thomas G. Warner
To:
Sent: Saturday, November 21, 1998 9:45 AM
Subject: GMC: nylon air tubing in colors
>sometime this winter I am going to replace most if not all of my air tubing
>and fittings on my coach. I have been hesitant thus far since I could not
>find the tubing in the original colors. Think I have now found it and am
>going to contact the company to find out prices. Would anyone else be
>interested in getting a complete set of new air lines for their coaches? We
>many save a substantial amount of money if we buy in bulk.
>
>The company is Maza Industries in rochester NY and the information is:
>
>http://www.mazzerplastics.com/
>
>Mazzer Nylon Tubing
>(Inches)
> Ref. Size O.D. Nom. In. I.D. Nom. In. Wall Thickness Nom. In. Min.
>Bend Radius In. O.D. Tol. In. I.D. Tol. In. Min. Burst Pressure PSI @
>75 deg. F Mazzer Coil Length
>2 1/8 .080 .023 .70 +.002-.0045 +/-.004 1000 100, 500, 1000 ft.*
>2.5 5/32 .106 .025 .94 +.002-.0045 +/-.004 1000 100, 500, 1000 ft.*
>3 3/16 .118 .035 1.1 +.002-.0055 +/-.004 1000 100, 500, 1000 ft.*
>4 1/4 .180 .035 1.5 +.002-.0055 +/-.004 1000 100, 500, 1000 ft.**
>417 1/4 .170 .040 1.5 +.002-.0055 +/-.004 1200 100, 500, 1000 ft.**
>462 1/4 .126 .062 1.5 +.002-.0055 +/-.004 2000 100, 500, 1000 ft.**
>5 5/16 .233 .040 1.85 +.002-.0055 +/-.004 1000 100, 500, 1000 ft.**
>6 3/8 .275 .050 2.25 +.002-.0055 +/-.004 1000 100, 500, 1000 ft.
>8 1/2 .375 .062 3 +.002-.0055 +/-.004 1000 100, 500 ft.
>10 5/8 .500 .062 3.75 +/-.004 +/-.004 600 100 ft.
>12 3/4 .560 .095 4.5 +/-.004 +/-.004 790 100 ft.
>16 1 .750 .125 6 +/-.006 +/-.006 790 100 ft.
>
>Note: Specified minimum bend radius is for minimal tube flattening.
>*Reels available up to 5000 feet. **Reels available in 2000 feet.
>Colors: Neutral (N), Black (B), Red (R), Blue (BU), Green (G) Yellow (Y),
>Orange (OR), Gray (GY).
>Call for availability of DOT approved tubing.
>Tom & Marg Warner
>Vernon Center NY
>1976 palmbeach
>
I might be interested if you will give us prices. Don't know how bad mine is, but it cant hurt to put
in new. How about leveling valves, or solenoids... Are those OK or should we be considering changing
those also.
Regards
Al Chernoff
> sometime this winter I am going to replace most if not all of my air tubing
> and fittings on my coach. I have been hesitant thus far since I could not
> find the tubing in the original colors. Think I have now found it and am
> going to contact the company to find out prices. Would anyone else be
> interested in getting a complete set of new air lines for their coaches? We
> many save a substantial amount of money if we buy in bulk.
>
> The company is Maza Industries in rochester NY and the information is:
>
> http://www.mazzerplastics.com/
>
> Mazzer Nylon Tubing
> (Inches)
> Ref. Size O.D. Nom. In. I.D. Nom. In. Wall Thickness Nom. In. Min.
> Bend Radius In. O.D. Tol. In. I.D. Tol. In. Min. Burst Pressure PSI @
> 75 deg. F Mazzer Coil Length
> 2 1/8 .080 .023 .70 +.002-.0045 +/-.004 1000 100, 500, 1000 ft.*
> 2.5 5/32 .106 .025 .94 +.002-.0045 +/-.004 1000 100, 500, 1000 ft.*
> 3 3/16 .118 .035 1.1 +.002-.0055 +/-.004 1000 100, 500, 1000 ft.*
> 4 1/4 .180 .035 1.5 +.002-.0055 +/-.004 1000 100, 500, 1000 ft.**
> 417 1/4 .170 .040 1.5 +.002-.0055 +/-.004 1200 100, 500, 1000 ft.**
> 462 1/4 .126 .062 1.5 +.002-.0055 +/-.004 2000 100, 500, 1000 ft.**
> 5 5/16 .233 .040 1.85 +.002-.0055 +/-.004 1000 100, 500, 1000 ft.**
> 6 3/8 .275 .050 2.25 +.002-.0055 +/-.004 1000 100, 500, 1000 ft.
> 8 1/2 .375 .062 3 +.002-.0055 +/-.004 1000 100, 500 ft.
> 10 5/8 .500 .062 3.75 +/-.004 +/-.004 600 100 ft.
> 12 3/4 .560 .095 4.5 +/-.004 +/-.004 790 100 ft.
> 16 1 .750 .125 6 +/-.006 +/-.006 790 100 ft.
>
> Note: Specified minimum bend radius is for minimal tube flattening.
> *Reels available up to 5000 feet. **Reels available in 2000 feet.
> Colors: Neutral (N), Black (B), Red (R), Blue (BU), Green (G) Yellow (Y),
> Orange (OR), Gray (GY).
> Call for availability of DOT approved tubing.
> Tom & Marg Warner
> Vernon Center NY
> 1976 palmbeach
in new. How about leveling valves, or solenoids... Are those OK or should we be considering changing
those also.
Regards
Al Chernoff
> sometime this winter I am going to replace most if not all of my air tubing
> and fittings on my coach. I have been hesitant thus far since I could not
> find the tubing in the original colors. Think I have now found it and am
> going to contact the company to find out prices. Would anyone else be
> interested in getting a complete set of new air lines for their coaches? We
> many save a substantial amount of money if we buy in bulk.
>
> The company is Maza Industries in rochester NY and the information is:
>
> http://www.mazzerplastics.com/
>
> Mazzer Nylon Tubing
> (Inches)
> Ref. Size O.D. Nom. In. I.D. Nom. In. Wall Thickness Nom. In. Min.
> Bend Radius In. O.D. Tol. In. I.D. Tol. In. Min. Burst Pressure PSI @
> 75 deg. F Mazzer Coil Length
> 2 1/8 .080 .023 .70 +.002-.0045 +/-.004 1000 100, 500, 1000 ft.*
> 2.5 5/32 .106 .025 .94 +.002-.0045 +/-.004 1000 100, 500, 1000 ft.*
> 3 3/16 .118 .035 1.1 +.002-.0055 +/-.004 1000 100, 500, 1000 ft.*
> 4 1/4 .180 .035 1.5 +.002-.0055 +/-.004 1000 100, 500, 1000 ft.**
> 417 1/4 .170 .040 1.5 +.002-.0055 +/-.004 1200 100, 500, 1000 ft.**
> 462 1/4 .126 .062 1.5 +.002-.0055 +/-.004 2000 100, 500, 1000 ft.**
> 5 5/16 .233 .040 1.85 +.002-.0055 +/-.004 1000 100, 500, 1000 ft.**
> 6 3/8 .275 .050 2.25 +.002-.0055 +/-.004 1000 100, 500, 1000 ft.
> 8 1/2 .375 .062 3 +.002-.0055 +/-.004 1000 100, 500 ft.
> 10 5/8 .500 .062 3.75 +/-.004 +/-.004 600 100 ft.
> 12 3/4 .560 .095 4.5 +/-.004 +/-.004 790 100 ft.
> 16 1 .750 .125 6 +/-.006 +/-.006 790 100 ft.
>
> Note: Specified minimum bend radius is for minimal tube flattening.
> *Reels available up to 5000 feet. **Reels available in 2000 feet.
> Colors: Neutral (N), Black (B), Red (R), Blue (BU), Green (G) Yellow (Y),
> Orange (OR), Gray (GY).
> Call for availability of DOT approved tubing.
> Tom & Marg Warner
> Vernon Center NY
> 1976 palmbeach
In a message dated 98-11-21 10:41:22 EST, you write:
> d out prices. Would anyone else be
> > interested in getting a complete set of new air lines for their coaches?
Tom, sure. I'm in.
As always, best regards.
~ Ritch & Betty Hwang ~ Clarkston, MI ~ mailto:rhwang
~ =^..^= Trinket ~ the shy Persian kitty ~
~ 76 GMC Birchaven ~ FMCA F249339 ~ RVClub 00930 ~ ICQ# 6408591~
(B}>
> d out prices. Would anyone else be
> > interested in getting a complete set of new air lines for their coaches?
Tom, sure. I'm in.
As always, best regards.
~ Ritch & Betty Hwang ~ Clarkston, MI ~ mailto:rhwang
~ =^..^= Trinket ~ the shy Persian kitty ~
~ 76 GMC Birchaven ~ FMCA F249339 ~ RVClub 00930 ~ ICQ# 6408591~
(B}>
Arch,
We got our DOT approved brass fittings from an industrial supply place.
These fittings have the inner crush protection as part of the fitting
instead of a separate piece that you insert into the line first. I believe
this is required for the DOT fittings. This is the way the original
fittings on the GMC were, although some of the crush protectors do come out
with the air line on the old fittings from fatigue. Some of the GMC
fittings also have some strange sizes/threads (height valves IIRC), so we
did have to reuse a couple of the originals with new crush nuts.
I'll look up more information about where we got them if you can't find
them. The DOT fittings and line are most commonly used for truck air
brakes, so any truck service stations would probably carry them or know
where to get them. I would also suspect that the nylon line place might
also carry them since they indicate that they sell DOT line.
Of course if you really want to go nuts, you can go with stainless steel
braided teflon line. Then you can have AN fittings! It wouldn't be color
coded, but boy would it look good! That is what we went to in our race car
after our new mufflers (yeah I know there aren't supposed to be mufflers on
race cars but tell that to NHRA) melted our nylon line. We also rerouted
that line, so don't get the idea that you can mount this stuff near
anything too hot. At only $86 per 20' section, and $23 per stainless
steel fitting (only $6 if you just want regular steel fittings), you could
do all the GMC's air lines for just under $1000.00. It's a good thing
our race car only had one 5' line!
Zak
>Zak
>
>Thanks I always like getting info from you. I am an old gear head
>from way back. I would like to find some good connectors for
>the lines.
>
>Take Care
>Arch 76 GB IL
We got our DOT approved brass fittings from an industrial supply place.
These fittings have the inner crush protection as part of the fitting
instead of a separate piece that you insert into the line first. I believe
this is required for the DOT fittings. This is the way the original
fittings on the GMC were, although some of the crush protectors do come out
with the air line on the old fittings from fatigue. Some of the GMC
fittings also have some strange sizes/threads (height valves IIRC), so we
did have to reuse a couple of the originals with new crush nuts.
I'll look up more information about where we got them if you can't find
them. The DOT fittings and line are most commonly used for truck air
brakes, so any truck service stations would probably carry them or know
where to get them. I would also suspect that the nylon line place might
also carry them since they indicate that they sell DOT line.
Of course if you really want to go nuts, you can go with stainless steel
braided teflon line. Then you can have AN fittings! It wouldn't be color
coded, but boy would it look good! That is what we went to in our race car
after our new mufflers (yeah I know there aren't supposed to be mufflers on
race cars but tell that to NHRA) melted our nylon line. We also rerouted
that line, so don't get the idea that you can mount this stuff near
anything too hot
. At only $86 per 20' section, and $23 per stainlesssteel fitting (only $6 if you just want regular steel fittings), you could
do all the GMC's air lines for just under $1000.00
. It's a good thingour race car only had one 5' line!
Zak
>Zak
>
>Thanks I always like getting info from you. I am an old gear head
>from way back. I would like to find some good connectors for
>the lines.
>
>Take Care
>Arch 76 GB IL
Let Me know the price if You can get it Bulk. Anyone
have an Idea of what it should cost?
Rob Teed 74 Painted Desert
> Subject: Re: GMC: nylon air tubing in colors
>
>
> In a message dated 98-11-21 10:41:22 EST, you write:
>
> > d out prices. Would anyone else be
> > > interested in getting a complete set of new air lines for
> their coaches?
have an Idea of what it should cost?
Rob Teed 74 Painted Desert
> Subject: Re: GMC: nylon air tubing in colors
>
>
> In a message dated 98-11-21 10:41:22 EST, you write:
>
> > d out prices. Would anyone else be
> > > interested in getting a complete set of new air lines for
> their coaches?
I'm interested, depending on the price of course.
Ted Schurman
73 Glacier VA
>
> sometime this winter I am going to replace most if not all of my air tubing
> and fittings on my coach. I have been hesitant thus far since I could not
> find the tubing in the original colors. Think I have now found it and am
> going to contact the company to find out prices. Would anyone else be
> interested in getting a complete set of new air lines for their coaches? We
> many save a substantial amount of money if we buy in bulk.
>
> The company is Maza Industries in rochester NY and the information is:
>
> http://www.mazzerplastics.com/
>
Ted Schurman
73 Glacier VA
>
> sometime this winter I am going to replace most if not all of my air tubing
> and fittings on my coach. I have been hesitant thus far since I could not
> find the tubing in the original colors. Think I have now found it and am
> going to contact the company to find out prices. Would anyone else be
> interested in getting a complete set of new air lines for their coaches? We
> many save a substantial amount of money if we buy in bulk.
>
> The company is Maza Industries in rochester NY and the information is:
>
> http://www.mazzerplastics.com/
>
>
>Henry,
> If the price is not out of line. Count me in. Advise
>Dvm22727,
>76 Eleganza II
>Portage, Mi
>
>
Actually, someone else made the offer. I'm also interested though.
Henry
Henry Davis Consulting, Inc / new product consulting
PO Box 1270 / product readiness reviews
Soquel, Ca 95073 / IP reviews
ph: (408) 462-5199 / full service marketing
fax: (408) 462-5198
http://www.henry-davis.com
>Henry,
> If the price is not out of line. Count me in. Advise
>Dvm22727,
>76 Eleganza II
>Portage, Mi
>
>
Actually, someone else made the offer. I'm also interested though.
Henry
Henry Davis Consulting, Inc / new product consulting
PO Box 1270 / product readiness reviews
Soquel, Ca 95073 / IP reviews
ph: (408) 462-5199 / full service marketing
fax: (408) 462-5198
http://www.henry-davis.com
