Newbie question (first post) Viair or rebuild Dana?

[6cuda6]

Just an update....after installing a "known good" Dana my system really didnt work unless i used my portable shop compressor.....i finally found an
acceptable price on a Viair 480c and retrofitted that to the Electro Level 1 system and holly molly 30 seconds from 0 to 120....empty bags to ride
height!!

Now to be fair...Dana #1 had lost piston #1 because the crank pin came out...Dana #2 had the same problem as Dana #1....so both were trying to pump up
the coach on 1 cylinder....but i dont think it would compare to the Viair.
--
Rich Mondor,

Brockville, ON

77 Hughes 2600

 

[Keith V]

My compressor is too big. Said no one ever!

Keith Vasilakes
Mounds View MN
76 exRoyale
MicroLevel
________________________________
From: Gmclist on behalf of tonka6cuda6--- via Gmclist
Sent: Thursday, October 17, 2019 2:04 PM
To: gmclist
Cc: tonka6cuda6
Subject: Re: [GMCnet] Newbie question (first post) Viair or rebuild Dana?

Just an update....after installing a "known good" Dana my system really didnt work unless i used my portable shop compressor.....i finally found an
acceptable price on a Viair 480c and retrofitted that to the Electro Level 1 system and holly molly 30 seconds from 0 to 120....empty bags to ride
height!!

Now to be fair...Dana #1 had lost piston #1 because the crank pin came out...Dana #2 had the same problem as Dana #1....so both were trying to pump up
the coach on 1 cylinder....but i dont think it would compare to the Viair.
--
Rich Mondor,

Brockville, ON

77 Hughes 2600

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org