New dash underway

It is very nice and great to have everything in the dash!

Keep up the great work, I am looking forward to the final results.

Take care,
Tom K.
--
Tom & Oki Katzenberger,
Kingsville, Maryland,
1977 23' Birchaven, 455 C.I.D.
 
URL no works for me

Sully
Bellevue wa

On Fri, Jul 23, 2021 at 5:04 PM Greg Crawford
wrote:

> Here is a picture of my first trial fit after cutting out all the holes. I
> think it's gonna work.
>
>
> [url]"]http://www.gmcmhphotos.com/photos/data/7367/medium/Dash_11.jpg][url]
>
> --
> Greg Crawford
> KM4ZCR
> Knoxville, TN
>
> "Ruby Sue"
> 1977 Royale
> Rear Bath
> 403 Engine
> American Eagle Wheels
> Early Version Alex Sirum Quad bags
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
 
As I have posted several times in the past
the proper way to post URLs is to enclose
them in parentheses ( ) and hit return to
then cause underlining of the enclosed URL
to keep it all together.

D C "Mac" Macdonald
Amateur Radio K2GKK
Since 30 November '53
USAF and FAA, Retired
Member GMCMI & Classics
Oklahoma City, OK
"The Money Pit"
TZE166V101966
'76 ex-Palm Beach
k2gkk + hotmail dot com
________________________________
From: Todd Sullivan
Sent: Saturday, July 24, 2021 09:27
To: gmclist
Subject: [GMCnet] Re: New dash underway

URL no works for me

Sully
Bellevue wa

On Fri, Jul 23, 2021 at 5:04 PM Greg Crawford
wrote:

> Here is a picture of my first trial fit after cutting out all the holes. I
> think it's gonna work.
>
>
> [url]"]https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.gmcmhphotos.com%2Fphotos%2Fdata%2F7367%2Fmedium%2FDash_11.jpg&data=04%7C01%7C%7C1740b75c826f492f655508d94eaf3731%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637627336716522369%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=2iAqjlo0vimZjaYVx0jFxPeacgsSwN0RcbwG2O4%2BoM0%3D&reserved=0][url]
>
> --
> Greg Crawford
> KM4ZCR
> Knoxville, TN
>
> "Ruby Sue"
> 1977 Royale
> Rear Bath
> 403 Engine
> American Eagle Wheels
> Early Version Alex Sirum Quad bags
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
 
That link works.

On Sat, Jul 24, 2021 at 10:29 AM D C _Mac_ Macdonald
wrote:

> As I have posted several times in the past
> the proper way to post URLs is to enclose
> them in parentheses ( ) and hit return to
> then cause underlining of the enclosed URL
> to keep it all together.
>
> D C "Mac" Macdonald
> Amateur Radio K2GKK
> Since 30 November '53
> USAF and FAA, Retired
> Member GMCMI & Classics
> Oklahoma City, OK
> "The Money Pit"
> TZE166V101966
> '76 ex-Palm Beach
> k2gkk + hotmail dot com
> ________________________________
> From: Todd Sullivan
> Sent: Saturday, July 24, 2021 09:27
> To: gmclist
> Subject: [GMCnet] Re: New dash underway
>
> URL no works for me
>
> Sully
> Bellevue wa
>
> On Fri, Jul 23, 2021 at 5:04 PM Greg Crawford

>
> > Here is a picture of my first trial fit after cutting out all the holes.
> I
> > think it's gonna work.
> >
> >
> > [url"]https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.gmcmhphotos.com%2Fphotos%2Fdata%2F7367%2Fmedium%2FDash_11.jpg&data=04%7C01%7C%7C1740b75c826f492f655508d94eaf3731%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637627336716522369%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=2iAqjlo0vimZjaYVx0jFxPeacgsSwN0RcbwG2O4%2BoM0%3D&reserved=0][url
> ]
> >
> > --
> > Greg Crawford
> > KM4ZCR
> > Knoxville, TN
> >
> > "Ruby Sue"
> > 1977 Royale
> > Rear Bath
> > 403 Engine
> > American Eagle Wheels
> > Early Version Alex Sirum Quad bags
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> >
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
 
That is .125" aluminum. It is screwed to a 1 x 1 x 14 gauge steel tubing framework behind it. The top cover for the dash will be foam/fiberglass with
vinyl padding over it. I am completely redoing the air conditioning ducting once it leaves the airbox as well as using late model Jeep a/c controls.
The aluminum dash will be overlayed with a faux carbon fiber vinyl wrap product once fabrication is complete. Here is another picture with some of the
gauges mocked up in it. The factory gauges are held in with fabricated aluminum semi circular clamps on the reverse side. I have to order my Autometer
gauges to fill in most of the holes. I already have my double din touch screen stereo with Bluetooth and back up camera, which will be switchable so
that I can turn it on whenever I wish. The smaller rectangular opening on the right is for the A/C control panel. The rectangular plastic pieces on
each side of the column hole are for Carling switches that I got from Rocker Switch Pros. You can have the switch actuators custom engraved with
anything you wish. Depending upon the switch body you select, they will have independent lights that light up the writing at the top of the switch,
for example, when the coach's lights are on, and dependent lights that will light up the bottom of the switch when the switch is in the on position.

([url])"]http://www.gmcmhphotos.com/photos/data/7367/medium/Dash_21.jpg][url])

([url])"]http://www.gmcmhphotos.com/photos/data/7367/medium/Switch_Actuators.jpg][url])
--
Greg Crawford
KM4ZCR
Knoxville, TN

"Ruby Sue"
1977 Royale
Rear Bath
403 Engine
American Eagle Wheels
Early Version Alex Sirum Quad bags
 
This link doesn't work for mr

On Sat, Jul 24, 2021 at 6:31 PM Greg Crawford
wrote:

> That is .125" aluminum. It is screwed to a 1 x 1 x 14 gauge steel tubing
> framework behind it. The top cover for the dash will be foam/fiberglass with
> vinyl padding over it. I am completely redoing the air conditioning
> ducting once it leaves the airbox as well as using late model Jeep a/c
> controls.
> The aluminum dash will be overlayed with a faux carbon fiber vinyl wrap
> product once fabrication is complete. Here is another picture with some of
> the
> gauges mocked up in it. The factory gauges are held in with fabricated
> aluminum semi circular clamps on the reverse side. I have to order my
> Autometer
> gauges to fill in most of the holes. I already have my double din touch
> screen stereo with Bluetooth and back up camera, which will be switchable so
> that I can turn it on whenever I wish. The smaller rectangular opening on
> the right is for the A/C control panel. The rectangular plastic pieces on
> each side of the column hole are for Carling switches that I got from
> Rocker Switch Pros. You can have the switch actuators custom engraved with
> anything you wish. Depending upon the switch body you select, they will
> have independent lights that light up the writing at the top of the switch,
> for example, when the coach's lights are on, and dependent lights that
> will light up the bottom of the switch when the switch is in the on
> position.
>
>
> ([url"]http://www.gmcmhphotos.com/photos/data/7367/medium/Dash_21.jpg][url
> ])
>
> ([url"]http://www.gmcmhphotos.com/photos/data/7367/medium/Switch_Actuators.jpg][url
> ])
> --
> Greg Crawford
> KM4ZCR
> Knoxville, TN
>
> "Ruby Sue"
> 1977 Royale
> Rear Bath
> 403 Engine
> American Eagle Wheels
> Early Version Alex Sirum Quad bags
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>

--
William S. Schurman
box 772806
Steamboat Springs, CO
80477
1978 Palm Beach
TZE168V100258
 
Me neither

> This link doesn't work for mr
>
> On Sat, Jul 24, 2021 at 6:31 PM Greg Crawford

>
> > That is .125" aluminum. It is screwed to a 1 x 1 x 14 gauge steel tubing
> > framework behind it. The top cover for the dash will be foam/fiberglass
> with
> > vinyl padding over it. I am completely redoing the air conditioning
> > ducting once it leaves the airbox as well as using late model Jeep a/c
> > controls.
> > The aluminum dash will be overlayed with a faux carbon fiber vinyl wrap
> > product once fabrication is complete. Here is another picture with some
> of
> > the
> > gauges mocked up in it. The factory gauges are held in with fabricated
> > aluminum semi circular clamps on the reverse side. I have to order my
> > Autometer
> > gauges to fill in most of the holes. I already have my double din touch
> > screen stereo with Bluetooth and back up camera, which will be
> switchable so
> > that I can turn it on whenever I wish. The smaller rectangular opening
> on
> > the right is for the A/C control panel. The rectangular plastic pieces on
> > each side of the column hole are for Carling switches that I got from
> > Rocker Switch Pros. You can have the switch actuators custom engraved
> with
> > anything you wish. Depending upon the switch body you select, they will
> > have independent lights that light up the writing at the top of the
> switch,
> > for example, when the coach's lights are on, and dependent lights that
> > will light up the bottom of the switch when the switch is in the on
> > position.
> >
> >
> > ([url"]http://www.gmcmhphotos.com/photos/data/7367/medium/Dash_21.jpg][url
> > ])
> >
> > ([url"]http://www.gmcmhphotos.com/photos/data/7367/medium/Switch_Actuators.jpg][url
> > ])
> > --
> > Greg Crawford
> > KM4ZCR
> > Knoxville, TN
> >
> > "Ruby Sue"
> > 1977 Royale
> > Rear Bath
> > 403 Engine
> > American Eagle Wheels
> > Early Version Alex Sirum Quad bags
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> >
>
>
> --
> William S. Schurman
> box 772806
> Steamboat Springs, CO
> 80477
> 1978 Palm Beach
> TZE168V100258
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>

--
Jim Kanomata ASE
Applied/GMC, Newark,CA
jimk
http://www.gmcrvparts.com
1-800-752-7502
 
Also unable to open the photos

JR Wright

>
> Me neither
>
>

>
>> This link doesn't work for mr
>>
>> On Sat, Jul 24, 2021 at 6:31 PM Greg Crawford

>>
>>> That is .125" aluminum. It is screwed to a 1 x 1 x 14 gauge steel tubing
>>> framework behind it. The top cover for the dash will be foam/fiberglass
>> with
>>> vinyl padding over it. I am completely redoing the air conditioning
>>> ducting once it leaves the airbox as well as using late model Jeep a/c
>>> controls.
>>> The aluminum dash will be overlayed with a faux carbon fiber vinyl wrap
>>> product once fabrication is complete. Here is another picture with some
>> of
>>> the
>>> gauges mocked up in it. The factory gauges are held in with fabricated
>>> aluminum semi circular clamps on the reverse side. I have to order my
>>> Autometer
>>> gauges to fill in most of the holes. I already have my double din touch
>>> screen stereo with Bluetooth and back up camera, which will be
>> switchable so
>>> that I can turn it on whenever I wish. The smaller rectangular opening
>> on
>>> the right is for the A/C control panel. The rectangular plastic pieces on
>>> each side of the column hole are for Carling switches that I got from
>>> Rocker Switch Pros. You can have the switch actuators custom engraved
>> with
>>> anything you wish. Depending upon the switch body you select, they will
>>> have independent lights that light up the writing at the top of the
>> switch,
>>> for example, when the coach's lights are on, and dependent lights that
>>> will light up the bottom of the switch when the switch is in the on
>>> position.
>>>
>>>
>>> ([url"]http://www.gmcmhphotos.com/photos/data/7367/medium/Dash_21.jpg][url
>>> ])
>>>
>>> ([url"]http://www.gmcmhphotos.com/photos/data/7367/medium/Switch_Actuators.jpg][url
>>> ])
>>> --
>>> Greg Crawford
>>> KM4ZCR
>>> Knoxville, TN
>>>
>>> "Ruby Sue"
>>> 1977 Royale
>>> Rear Bath
>>> 403 Engine
>>> American Eagle Wheels
>>> Early Version Alex Sirum Quad bags
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>>
>>
>>
>> --
>> William S. Schurman
>> box 772806
>> Steamboat Springs, CO
>> 80477
>> 1978 Palm Beach
>> TZE168V100258
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>>
>
>
> --
> Jim Kanomata ASE
> Applied/GMC, Newark,CA
> jimk
> http://www.gmcrvparts.com
> 1-800-752-7502
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
 
I'm sorry guys. I used the instructions from the sticky "Best Way Ever to Embed Pictures in the Forum". The pictures show up fine in the forum on my
end. If someone can tell me what I am doing wrong, I will be glad to try and fix it.
--
Greg Crawford
KM4ZCR
Knoxville, TN

"Ruby Sue"
1977 Royale
Rear Bath
403 Engine
American Eagle Wheels
Early Version Alex Sirum Quad bags
 
Try these:
http://www.gmcmhphotos.com/photos/data/7367/medium/Dash_21.jpg

https://www.gmcmhphotos.com/photos/data/7367/medium/Switch_Actuators.jpg

Ken H.

On Sun, Jul 25, 2021 at 8:00 PM Greg Crawford
wrote:

> I'm sorry guys. I used the instructions from the sticky "Best Way Ever to
> Embed Pictures in the Forum". The pictures show up fine in the forum on my
> end. If someone can tell me what I am doing wrong, I will be glad to try
> and fix it.
> --
> Greg Crawford
> KM4ZCR
> Knoxville, TN
>
> "Ruby Sue"
> 1977 Royale
> Rear Bath
> 403 Engine
> American Eagle Wheels
> Early Version Alex Sirum Quad bags
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
 
ttry this link:

http://www.gmcmhphotos.com/photos/interior/p68266-dash-2.html
[http://www.gmcmhphotos.com/photos/data/7367/medium/Dash_21.jpg]http://www.gmcmhphotos.com/photos/interior/p68266-dash-2.html
Dash 2http://www.gmcmhphotos.com/photos/interior/p68266-dash-2.html
Dash with most holes mocked up.
www.gmcmhphotos.com

________________________________
From: John Wright
Sent: Sunday, July 25, 2021 2:13 PM
To: gmclist
Subject: [GMCnet] Re: New dash underway

Also unable to open the photos

JR Wright

>
> Me neither
>
>

>
>> This link doesn't work for mr
>>
>> On Sat, Jul 24, 2021 at 6:31 PM Greg Crawford

>>
>>> That is .125" aluminum. It is screwed to a 1 x 1 x 14 gauge steel tubing
>>> framework behind it. The top cover for the dash will be foam/fiberglass
>> with
>>> vinyl padding over it. I am completely redoing the air conditioning
>>> ducting once it leaves the airbox as well as using late model Jeep a/c
>>> controls.
>>> The aluminum dash will be overlayed with a faux carbon fiber vinyl wrap
>>> product once fabrication is complete. Here is another picture with some
>> of
>>> the
>>> gauges mocked up in it. The factory gauges are held in with fabricated
>>> aluminum semi circular clamps on the reverse side. I have to order my
>>> Autometer
>>> gauges to fill in most of the holes. I already have my double din touch
>>> screen stereo with Bluetooth and back up camera, which will be
>> switchable so
>>> that I can turn it on whenever I wish. The smaller rectangular opening
>> on
>>> the right is for the A/C control panel. The rectangular plastic pieces on
>>> each side of the column hole are for Carling switches that I got from
>>> Rocker Switch Pros. You can have the switch actuators custom engraved
>> with
>>> anything you wish. Depending upon the switch body you select, they will
>>> have independent lights that light up the writing at the top of the
>> switch,
>>> for example, when the coach's lights are on, and dependent lights that
>>> will light up the bottom of the switch when the switch is in the on
>>> position.
>>>
>>>
>>> ([url"]http://www.gmcmhphotos.com/photos/data/7367/medium/Dash_21.jpg][url
>>> ])
>>>
>>> ([url"]http://www.gmcmhphotos.com/photos/data/7367/medium/Switch_Actuators.jpg][url
>>> ])
>>> --
>>> Greg Crawford
>>> KM4ZCR
>>> Knoxville, TN
>>>
>>> "Ruby Sue"
>>> 1977 Royale
>>> Rear Bath
>>> 403 Engine
>>> American Eagle Wheels
>>> Early Version Alex Sirum Quad bags
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>>
>>
>>
>> --
>> William S. Schurman
>> box 772806
>> Steamboat Springs, CO
>> 80477
>> 1978 Palm Beach
>> TZE168V100258
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>>
>
>
> --
> Jim Kanomata ASE
> Applied/GMC, Newark,CA
> jimk
> http://www.gmcrvparts.com
> 1-800-752-7502
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
 
Here are a couple of pictures showing progress as of late. I apologize in advance for those of you who can't see the pictures. I am using the
instructions in the sticky at the first of the forum. If there is a better way, please tell me.

[url]"]http://www.gmcmhphotos.com/photos/data/7367/medium/Indicator_post.jpg][url]

[url]"]http://www.gmcmhphotos.com/photos/data/7367/medium/Dash_8-2.jpg][url]

[url]"]http://www.gmcmhphotos.com/photos/data/7367/medium/Dash_8-1.jpg][url]
--
Greg Crawford
KM4ZCR
Knoxville, TN

"Ruby Sue"
1977 Royale
Rear Bath
403 Engine
American Eagle Wheels
Early Version Alex Sirum Quad bags
 
The forum is a poor way to share pictures. You should be using the photo site for your pictures. It has 53,300+ photos that have been viewed more than 45,875,400+ times! We have kept these pictures safe for many years.

You need to go here:

http://www.gmcmhphotos.com

J.R. Wright
GMC Great Laker MHC
GMCGL Tech Editor
GMC Eastern States Charter Member
GMCMI
78 GMC Buskirk 29.5’ Stretch
75 GMC Avion (Under Reconstruction)
Michigan

>
> Here are a couple of pictures showing progress as of late. I apologize in advance for those of you who can't see the pictures. I am using the
> instructions in the sticky at the first of the forum. If there is a better way, please tell me.
>
> [url]"]http://www.gmcmhphotos.com/photos/data/7367/medium/Indicator_post.jpg][url]
>
>
> [url]"]http://www.gmcmhphotos.com/photos/data/7367/medium/Dash_8-2.jpg][url]
>
>
> [url]"]http://www.gmcmhphotos.com/photos/data/7367/medium/Dash_8-1.jpg][url]
> --
> Greg Crawford
> KM4ZCR
> Knoxville, TN
>
> "Ruby Sue"
> 1977 Royale
> Rear Bath
> 403 Engine
> American Eagle Wheels
> Early Version Alex Sirum Quad bags
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
 
They are all on the photo site. I was merely posting the pictures per the instructions on the sticky so folks wouldn't have to go to the photo site. I
guess it's just one more click...
--
Greg Crawford
KM4ZCR
Knoxville, TN

"Ruby Sue"
1977 Royale
Rear Bath
403 Engine
American Eagle Wheels
Early Version Alex Sirum Quad bags
 
Greg, If you'll just edit off the prefixes before "http..." and the
suffixes after "...jpg", the links will work.

Ken H.

On Sun, Aug 1, 2021 at 4:32 PM Greg Crawford
wrote:

> They are all on the photo site. I was merely posting the pictures per the
> instructions on the sticky so folks wouldn't have to go to the photo site. I
> guess it's just one more click...
> --
> Greg Crawford
> KM4ZCR
> Knoxville, TN
>
> "Ruby Sue"
> 1977 Royale
> Rear Bath
> 403 Engine
> American Eagle Wheels
> Early Version Alex Sirum Quad bags
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
 
He did you the photosite....
Greg,
That Dash is awesome, how do you make that heater control work with the heater system?
It looks great for sure

Keith Vasilakes
Mounds View MN
76 exRoyale
MicroLevelhttp://www.gmcmotorhomemarketplace.com/vasilakes/microlevel_intro.pdf

________________________________
From: John Wright
Sent: Sunday, August 1, 2021 3:15 PM
To: gmclist
Subject: [GMCnet] Re: New dash underway

The forum is a poor way to share pictures. You should be using the photo site for your pictures. It has 53,300+ photos that have been viewed more than 45,875,400+ times! We have kept these pictures safe for many years.

You need to go here:

http://www.gmcmhphotos.com

J.R. Wright
GMC Great Laker MHC
GMCGL Tech Editor
GMC Eastern States Charter Member
GMCMI
78 GMC Buskirk 29.5’ Stretch
75 GMC Avion (Under Reconstruction)
Michigan

>
> Here are a couple of pictures showing progress as of late. I apologize in advance for those of you who can't see the pictures. I am using the
> instructions in the sticky at the first of the forum. If there is a better way, please tell me.
>
> [url]"]http://www.gmcmhphotos.com/photos/data/7367/medium/Indicator_post.jpg][url]
>
>
> [url]"]http://www.gmcmhphotos.com/photos/data/7367/medium/Dash_8-2.jpg][url]
>
>
> [url]"]http://www.gmcmhphotos.com/photos/data/7367/medium/Dash_8-1.jpg][url]
> --
> Greg Crawford
> KM4ZCR
> Knoxville, TN
>
> "Ruby Sue"
> 1977 Royale
> Rear Bath
> 403 Engine
> American Eagle Wheels
> Early Version Alex Sirum Quad bags
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
 
You must log in or register to reply here.
Applied GMC
GMCMI Fall 2026 Rally

Share this page

Share this page
Top Bottom
Back