I am feeling a little neutered.... I used to have two now I have one ---
muffler. I had the two turbo mufflers removed and replaced with straight
pipes. I retained the original T connection to my existing 3 inch exhaust
pipe down the side. The 3 inch pipe was cut off at about the second frame
member from the rear and a 3 inch by 3 inch turbo muffler was put in as
shown in Steve's pictures.
http://www.california.com/~eagle/ypipe.html
We did not use the same muffler as Steve because this guy could not get it
soon enough.
The install was a little tricky since he had to go over my trailer hitch
support so the pipe would not be too low. I think it is a little louder
than the original system but does not bother and is at the rear of coach.
I had a chance to hear a GMC with a straight pipe (just after cutting out
the mufflers) and it really Blatts...... Need some muffler.
Total cost was $143 including labor and muffler. less than one Flow Master.
We will see how it goes. I have a Howell TBI so I am sure the computer
will handle any mixture adjustments.
gene
Genef -- 77PB/ore/ca
GMC MOTORHOME INFORMATION
mr.erf
http://www.california.com/~eagle/
muffler. I had the two turbo mufflers removed and replaced with straight
pipes. I retained the original T connection to my existing 3 inch exhaust
pipe down the side. The 3 inch pipe was cut off at about the second frame
member from the rear and a 3 inch by 3 inch turbo muffler was put in as
shown in Steve's pictures.
http://www.california.com/~eagle/ypipe.html
We did not use the same muffler as Steve because this guy could not get it
soon enough.
The install was a little tricky since he had to go over my trailer hitch
support so the pipe would not be too low. I think it is a little louder
than the original system but does not bother and is at the rear of coach.
I had a chance to hear a GMC with a straight pipe (just after cutting out
the mufflers) and it really Blatts...... Need some muffler.
Total cost was $143 including labor and muffler. less than one Flow Master.
We will see how it goes. I have a Howell TBI so I am sure the computer
will handle any mixture adjustments.
gene
Genef -- 77PB/ore/ca
GMC MOTORHOME INFORMATION
mr.erf
http://www.california.com/~eagle/
