Microlevel

J

john shutzbaugh

New member
Jan 8, 2016
116
0
0
Will Sullybags clear the Microlevel sensor? Considering installation of both.

JohnS
--
John Shutzbaugh, Vacaville, CA, ncserv;
78 Buskirk stretch, "What were we thinking?"
 
Yep.. Just did that this summer. They are virtually in the same place as the OEM sensors.
--
Bill Van Vlack
'76 Royale; Guemes Island, Washington; Twin bed, full (DS) side bath, Brazilian Redwood counter and settee tops,455, 6KW generator; new owner a/o mid
November 2015.
 
Our Mono Bag system ,being similar to the Sully bag does fit and we supply
our with All parts so no need to source from others,
Also we are supporting the community with the Lower Ball Joints that have
been discontinued.
I don't think anyone is as committed to lay out that much funds
tokeepyour coaches on the road.
John, at least give me a chance to quote you on our Mono Bag.

On Fri, Dec 17, 2021 at 6:19 PM Bill Van Vlack
wrote:

> Yep.. Just did that this summer. They are virtually in the same place as
> the OEM sensors.
> --
> Bill Van Vlack
> '76 Royale; Guemes Island, Washington; Twin bed, full (DS) side bath,
> Brazilian Redwood counter and settee tops,455, 6KW generator; new owner a/o
> mid
> November 2015.
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>

--
Jim Kanomata ASE
Applied/GMC, Newark,CA
jimk
http://www.gmcrvparts.com
1-800-752-7502
 
Wow Jim. You almost sound like your hurting for business. Don’t forget to
tell everyone how you copied my solution to the wheel well clearance issue
and then modified your “mono bag” kits while refusing to sell mine ok?

Sully
Bellevue wa

> Our Mono Bag system ,being similar to the Sully bag does fit and we supply
> our with All parts so no need to source from others,
> Also we are supporting the community with the Lower Ball Joints that have
> been discontinued.
> I don't think anyone is as committed to lay out that much funds
> tokeepyour coaches on the road.
> John, at least give me a chance to quote you on our Mono Bag.
>
> On Fri, Dec 17, 2021 at 6:19 PM Bill Van Vlack

>
> > Yep.. Just did that this summer. They are virtually in the same place as
> > the OEM sensors.
> > --
> > Bill Van Vlack
> > '76 Royale; Guemes Island, Washington; Twin bed, full (DS) side bath,
> > Brazilian Redwood counter and settee tops,455, 6KW generator; new owner
> a/o
> > mid
> > November 2015.
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> >
>
>
> --
> Jim Kanomata ASE
> Applied/GMC, Newark,CA
> jimk
> http://www.gmcrvparts.com
> 1-800-752-7502
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
 
I did not copy your design.
I copied the one you and I derived from that person that did one for
himself.

> Wow Jim. You almost sound like your hurting for business. Don’t forget to
> tell everyone how you copied my solution to the wheel well clearance issue
> and then modified your “mono bag” kits while refusing to sell mine ok?
>
> Sully
> Bellevue wa
>
> On Fri, Dec 17, 2021 at 10:16 PM Jim Kanomata

>
> > Our Mono Bag system ,being similar to the Sully bag does fit and we
> supply
> > our with All parts so no need to source from others,
> > Also we are supporting the community with the Lower Ball Joints that have
> > been discontinued.
> > I don't think anyone is as committed to lay out that much funds
> > tokeepyour coaches on the road.
> > John, at least give me a chance to quote you on our Mono Bag.
> >
> > On Fri, Dec 17, 2021 at 6:19 PM Bill Van Vlack >

> >
> > > Yep.. Just did that this summer. They are virtually in the same place
> as
> > > the OEM sensors.
> > > --
> > > Bill Van Vlack
> > > '76 Royale; Guemes Island, Washington; Twin bed, full (DS) side bath,
> > > Brazilian Redwood counter and settee tops,455, 6KW generator; new owner
> > a/o
> > > mid
> > > November 2015.
> > > _______________________________________________
> > > GMCnet mailing list
> > > Unsubscribe or Change List Options:
> > >
> >
> >
> > --
> > Jim Kanomata ASE
> > Applied/GMC, Newark,CA
> > jimk
> > http://www.gmcrvparts.com
> > 1-800-752-7502
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> >
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>

--
Jim Kanomata ASE
Applied/GMC, Newark,CA
jimk
http://www.gmcrvparts.com
1-800-752-7502
 
Not true Jim.

Sully
Bellevue wa

> I did not copy your design.
> I copied the one you and I derived from that person that did one for
> himself.
>
>

>
> > Wow Jim. You almost sound like your hurting for business. Don’t forget to
> > tell everyone how you copied my solution to the wheel well clearance
> issue
> > and then modified your “mono bag” kits while refusing to sell mine ok?
> >
> > Sully
> > Bellevue wa
> >
> > On Fri, Dec 17, 2021 at 10:16 PM Jim Kanomata

> >
> > > Our Mono Bag system ,being similar to the Sully bag does fit and we
> > supply
> > > our with All parts so no need to source from others,
> > > Also we are supporting the community with the Lower Ball Joints that
> have
> > > been discontinued.
> > > I don't think anyone is as committed to lay out that much funds
> > > tokeepyour coaches on the road.
> > > John, at least give me a chance to quote you on our Mono Bag.
> > >
> > > On Fri, Dec 17, 2021 at 6:19 PM Bill Van Vlack <
> bill.van.vlack
> > >

> > >
> > > > Yep.. Just did that this summer. They are virtually in the same
> place
> > as
> > > > the OEM sensors.
> > > > --
> > > > Bill Van Vlack
> > > > '76 Royale; Guemes Island, Washington; Twin bed, full (DS) side bath,
> > > > Brazilian Redwood counter and settee tops,455, 6KW generator; new
> owner
> > > a/o
> > > > mid
> > > > November 2015.
> > > > _______________________________________________
> > > > GMCnet mailing list
> > > > Unsubscribe or Change List Options:
> > > >
> > >
> > >
> > > --
> > > Jim Kanomata ASE
> > > Applied/GMC, Newark,CA
> > > jimk
> > > http://www.gmcrvparts.com
> > > 1-800-752-7502
> > > _______________________________________________
> > > GMCnet mailing list
> > > Unsubscribe or Change List Options:
> > >
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> >
>
>
> --
> Jim Kanomata ASE
> Applied/GMC, Newark,CA
> jimk
> http://www.gmcrvparts.com
> 1-800-752-7502
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
 
You must log in or register to reply here.
Get your shine on at www.cruzingear.co
Applied GMC

Share this page

Share this page
Top Bottom
Back