Mevotech Ball Joints

[Richard RV]

> To our knowledge, they do not make the lower ball joints for the GMC MH.

Update

JimK, after further investigation, no shock - you are right and that's why I ordered the lower ball joints from you.

The Mevotech upper ball joints looked good but the rubber boot was poorly attached to the retaining/mounting ring, actually was missing some rubber,
and I sent them back. I didn't like the way the Moog uppers were made up of two plates instead of a single forging, and I also think the separate
rubber boot with retaining ring is a less than ideal design. I ended up using Delphi TC6499 for the upper ball joints.

Richard
--
'77 Birchaven TZE...777;
'76 Palm Beach under construction;
‘76 Edgemonte waiting its turn

 

[jim kanomata1]

I had Jim Bounds contact his people regarding the lower ball joints and I
will have them available in December.

> > To our knowledge, they do not make the lower ball joints for the GMC MH.
>
> Update
>
> JimK, after further investigation, no shock - you are right and that's why
> I ordered the lower ball joints from you.
>
> The Mevotech upper ball joints looked good but the rubber boot was poorly
> attached to the retaining/mounting ring, actually was missing some rubber,
> and I sent them back. I didn't like the way the Moog uppers were made up
> of two plates instead of a single forging, and I also think the separate
> rubber boot with retaining ring is a less than ideal design. I ended up
> using Delphi TC6499 for the upper ball joints.
>
> Richard
> --
> '77 Birchaven TZE...777;
> '76 Palm Beach under construction;
> ‘76 Edgemonte waiting its turn
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>

--
Jim Kanomata ASE
Applied/GMC, Newark,CA
jimk
http://www.gmcrvparts.com
1-800-752-7502