Measurement needed......please

[6cuda61]

Could someone do me a favor, please. I need the measurement of the width of the spare tire mount at the frame....so just a rough measure from the
outside edge to the outside edge of the mount. (So from outside of the left arm mount plate all the way to the outside edge of the right sife arm
plate were it gets bolted to the frame).

I dont have my coach close as im working out of town.....thanks.
--
Rich Mondor,

Brockville, ON

77 Hughes 2600

 

[tmsnyder]

I posted the dimensions and photos for you at

https://www.gmcmhforum.com/threads/spare-tire-mount-measurement-for-6cuda6.868/
--
Todd Snyder, Buffalo NY
1976 Eleganza II

 

[6cuda61]

Thank yoi Sir...much appreciated.

> I posted the dimensions and photos for you at
>
> https://www.gmcmhforum.com/threads/spare-tire-mount-measurement-for-6cuda6.868/

--
Rich Mondor,

Brockville, ON

77 Hughes 2600

 

[dave stragand1]

Each of the pads for the arms measures approximately 4.25” x 4.25” They are kind of a trapezoid shape with a point on the top that follows the arm.

Outside edge to outside edge is 20”

Inside edge to inside edge is 12”

There is a little room for adjustment. Hope that helps.

-Dave
1978 Transmode near Pittsburgh

>
> Could someone do me a favor, please. I need the measurement of the width of the spare tire mount at the frame....so just a rough measure from the
> outside edge to the outside edge of the mount. (So from outside of the left arm mount plate all the way to the outside edge of the right sife arm
> plate were it gets bolted to the frame).
>
> I dont have my coach close as im working out of town.....thanks.
> --
> Rich Mondor,
>
> Brockville, ON
>
> 77 Hughes 2600
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

 

[6cuda61]

Thanks Dave!

> Each of the pads for the arms measures approximately 4.25” x 4.25” They are kind of a trapezoid shape with a point on the top that follows
> the arm.
>
> Outside edge to outside edge is 20”
>
> Inside edge to inside edge is 12”
>
> There is a little room for adjustment. Hope that helps.
>
> -Dave
> 1978 Transmode near Pittsburgh
>

> >
> > Could someone do me a favor, please. I need the measurement of the width of the spare tire mount at the frame....so just a rough measure
> > from the
> > outside edge to the outside edge of the mount. (So from outside of the left arm mount plate all the way to the outside edge of the right
> > sife arm
> > plate were it gets bolted to the frame).
> >
> > I dont have my coach close as im working out of town.....thanks.
> > --
> > Rich Mondor,
> >
> > Brockville, ON
> >
> > 77 Hughes 2600
> >
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> > http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

--
Rich Mondor,

Brockville, ON

77 Hughes 2600