Manifolds

Sketch4u

Sketch4u

New member
Sep 9, 2019
111
2
3
Pittsfield, Illinois (Pike County - Deer Hunting C
Have the Palm Beach in the shop needing manifolds replaced. My mechanic is having a heck of a time locating a pair of manifolds. Part numbers he found
are: Right manifold #411970 Left manifold #407108.

Anyone have any suggestions as to where to locate a set of aftermarket manifolds or headers?

Also, needing the oil dipstick tube....

Samuel Ferguson
--
Samuel Ferguson
Pittsfield, Illinois
(West Central Illinois)
1976 GMC Palm Beach (A newbie who will not allow this thing to kick my butt!!)
 
www.summitracing.com

On Wed, Jun 17, 2020 at 10:18 AM Samuel Ferguson via Gmclist <

> Have the Palm Beach in the shop needing manifolds replaced. My mechanic is
> having a heck of a time locating a pair of manifolds. Part numbers he found
> are: Right manifold #411970 Left manifold #407108.
>
> Anyone have any suggestions as to where to locate a set of aftermarket
> manifolds or headers?
>
> Also, needing the oil dipstick tube....
>
> Samuel Ferguson
> --
> Samuel Ferguson
> Pittsfield, Illinois
> (West Central Illinois)
> 1976 GMC Palm Beach (A newbie who will not allow this thing to kick my
> butt!!)
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
 
EIther of the tow "Jims" could help, too.

And finally rock auto

On Wed, Jun 17, 2020 at 10:18 AM Samuel Ferguson via Gmclist <

> Have the Palm Beach in the shop needing manifolds replaced. My mechanic is
> having a heck of a time locating a pair of manifolds. Part numbers he found
> are: Right manifold #411970 Left manifold #407108.
>
> Anyone have any suggestions as to where to locate a set of aftermarket
> manifolds or headers?
>
> Also, needing the oil dipstick tube....
>
> Samuel Ferguson
> --
> Samuel Ferguson
> Pittsfield, Illinois
> (West Central Illinois)
> 1976 GMC Palm Beach (A newbie who will not allow this thing to kick my
> butt!!)
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
 
your in Illinois.

have them sourced from cinnabar out of Sandusky Michigan. Call them today, I bet you will have them friday. maybe even tomorrow. I think it was 2nd
day to get one to iowa from Michigan.

otherwise sirum gmc, or maybe applied. But last I thought JimK only had headers or used manifolds.

--
Jon Roche
75 palm beach
EBL EFI, manny headers, Micro Level, rebuilt most of coach now.
St. Cloud, MN
http://lqqkatjon.blogspot.com/
 
> your in Illinois.
> have them sourced from cinnabar out of Sandusky Michigan. Call them today, I bet you will have them friday. maybe even tomorrow. I think it was
> 2nd day to get one to iowa from Michigan.
> otherwise sirum gmc, or maybe applied. But last I thought JimK only had headers or used manifolds.

Jon,
Nothing wrong with a used manifold if it has been planed.
Does Cinnabar actually have cast manifolds for 455?
The problem is if the design cracks (like so many) there is usually no way to stop it.

Matt
--
Matt & Mary Colie - '73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan
OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Twixt A2 and Detroit
 
Matt-

I have not personally bought or seen one in person from cinnebar with my own eyes. but I know of for sure 2 people in the midwest that has bought a
manifold from cinnebar in the past 2 years. They claim thge manifold sure looked brand new and fit perfectly like a new part.

I did see a photo of the first one, and it looked brand new in the iphone photo. it was a 403 passenger side one that was a bit more rare to find
used.

I have talked to a couple others that I believe went to cinnebar and bought one, as I never heard back from them.

Sirum GMC now has them on his website too, but I know my friend in iowa that bought one from cinnebar had it in like 2 days. allowed him to make it
to his camping trip that weekend. He originally tried to weld it, but said it was too far gone for his welder to do anything with. this was
probably late summer of 2018. I would guess that shipping out of florida would put a manifold in the midwest more like early next week.

https://www.sirumvintagegmc.com/gmc-exhaust-system/exhaust-manifold-for-olds-403-or-455-v-8

still cheaper then what most pay for headers.

--
Jon Roche
75 palm beach
EBL EFI, manny headers, Micro Level, rebuilt most of coach now.
St. Cloud, MN
http://lqqkatjon.blogspot.com/
 
Yes Cinnabar had them reproduced. I have not seen in person, but comebacks are not a good business model, so they should be fine.
--
John Lebetski
Woodstock, IL
77 Eleganza II
 
You must log in or register to reply here.
GMCMI Fall 2026 Rally
Applied GMC

Share this page

Share this page
Top Bottom
Back