manifold-intake

Just not enough room. The top of the factory air cleaner only has about one
inch clearance above the carb. When the manifold raises the carb two
inches, something's gotta give.

Patrick

>
> instead of raising the floor, why dont you make the
> aircleaner thinner or go to a different sys.
> chris 75gb
 
Whatever you do to the air cleaner will affect how much air gets to the cylinders. Make sure you have enough
air coming in so as not to restrict the exhaust going out. Darren

> instead of raising the floor, why dont you make the aircleaner thinner or go to a different sys.
> chris 75gb
>
> Join 18 million Eudora users by signing up for a free Eudora Web-Mail account at http://www.eudoramail.com

- --
Darren Paget
76 Experimental
Another Fab Day
http://www.TZEplus.com
 
Christopher, Darren,

How about one of those K&N "Generation II" air filter kits? Maybe something
like that could be adapted to fit the GMC?
Check it out at:
http://www.performanceproducts.com/Catalog/KNENG/K&N%20Generation%20II%20Per
formance%20Kit.asp

Peter
77 Eleganza II
Colorado

- ----- Original Message -----
From: "Darren Paget"
To:
Sent: Monday, April 03, 2000 6:21 PM
Subject: Re: GMC: manifold-intake

> Whatever you do to the air cleaner will affect how much air gets to the
cylinders. Make sure you have enough
> air coming in so as not to restrict the exhaust going out. Darren
>

>
> > instead of raising the floor, why dont you make the aircleaner thinner
or go to a different sys.
> > chris 75gb
> >
> > Join 18 million Eudora users by signing up for a free Eudora Web-Mail
account at http://www.eudoramail.com
>
> --
> Darren Paget
> 76 Experimental
> Another Fab Day
> http://www.TZEplus.com
>
>
>
 
You must log in or register to reply here.
Applied GMC
GMCMI Fall 2026 Rally

Share this page

Share this page
Top Bottom
Back