manifold and other questions

[henry davis]

>I also need the big white seals that fit around the windows and the trim mold
>that connects the head liner and the wall liner....anyone know where you can
>get these?


Cinnabar has the white window trim. The molding to cover the area between
the wall and the ceiling is no longer available - but folks have used a
variety of materials as substitutes. I think that there is some information
about what folks have done on Gene's site (http://www.california.com/~eagle).

Henry

 

[john wright]

Dan,
Call Cinnabar @800-720-2227, They would be the only place that you might
fine the pieces in new condition. As for previously installed, try
Buskirk Rush RV tomorrow @800-715-1133 and ask for Max the Shop Manager
and tell him what your needs are.

As for an answer on the manifolds ask Max when you call.

>
> We are having to do some work on the manifold on our "77" Palm Beach and was
> wondering does a regular car engine exhaust manifold fit?
>
> I also need the big white seals that fit around the windows and the trim mold
> that connects the head liner and the wall liner....anyone know where you can
> get these?
>
> Dan

- --
J.R. Wright
GMC GreatLakers
77 Eleganza II
Michigan

 

[peter brandt]

Dan,

I bought the white inside window molding from Alex Sirum (941) 763-1121 a
few months ago, $2.00/ft IIRC. I had to use a small nylon hammer to get the
new molding seated in the aluminum channel, but it stays there once it's in!

Have fun!

Peter
77 Eleganza II
Colorado

- ----- Original Message -----
From:
To:
Sent: Sunday, July 23, 2000 8:00 AM
Subject: GMC: manifold and other questions

> We are having to do some work on the manifold on our "77" Palm Beach and
was
> wondering does a regular car engine exhaust manifold fit?
>
> I also need the big white seals that fit around the windows and the trim
mold
> that connects the head liner and the wall liner....anyone know where you
can
> get these?
>
> Dan
>

 

[gene]

might want to read this.

http://www.california.com/~eagle/engine.html

gene

>We are having to do some work on the manifold on our "77" Palm Beach and was
>wondering does a regular car engine exhaust manifold fit?
>
>I also need the big white seals that fit around the windows and the trim
mold
>that connects the head liner and the wall liner....anyone know where you can
>get these?
>
>Dan
>
Genef -- 77PB/ore/ca
GMC MOTORHOME INFORMATION
mr.erf
http://www.california.com/~eagle/