I'm having trouble with my generator and the shop believes it is the main board that is the problem. Where can I find a board?
Ron Barkley
1976 Eleganza II
Ron Barkley
1976 Eleganza II
main board for generator
- Thread starter ron and carol barkley
- Start date
Jumper the terminal 9 to the terminal 5. That will bypass the board and allow the ignition and fuel pump to work.
If it runs then the problem is indeed in the board.
You board might be able to be repaired. Or you can purchase a replacement from Applied GMC. appliedgmc.com http://appliedgmc.com/
Where do you live?
Emery Stora
77 Kingsley
Frederick, CO
>
> I'm having trouble with my generator and the shop believes it is the main board that is the problem. Where can I find a board?
>
> Ron Barkley
> 1976 Eleganza II
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
If it runs then the problem is indeed in the board.
You board might be able to be repaired. Or you can purchase a replacement from Applied GMC. appliedgmc.com http://appliedgmc.com/
Where do you live?
Emery Stora
77 Kingsley
Frederick, CO
>
> I'm having trouble with my generator and the shop believes it is the main board that is the problem. Where can I find a board?
>
> Ron Barkley
> 1976 Eleganza II
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
two other things. Check the oil level. There is a low oil pressure switch that will stop it from running.
Also check your fuel supply. If the main tank is below about 1/4 tank the Onan will not pick up any fuel.
Emery Stora
77 Kingsley
Frederick, CO
>
> I'm having trouble with my generator and the shop believes it is the main board that is the problem. Where can I find a board?
>
> Ron Barkley
> 1976 Eleganza II
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Also check your fuel supply. If the main tank is below about 1/4 tank the Onan will not pick up any fuel.
Emery Stora
77 Kingsley
Frederick, CO
>
> I'm having trouble with my generator and the shop believes it is the main board that is the problem. Where can I find a board?
>
> Ron Barkley
> 1976 Eleganza II
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
What he is saying, careful who you trust. Many mechanics that mean well have pointed others to replace unnessisary parts.
--
Jon Roche
75 palm beach
St. Cloud, MN
http://lqqkatjon.blogspot.com/
--
Jon Roche
75 palm beach
St. Cloud, MN
http://lqqkatjon.blogspot.com/
Execute the 9 to 5 test and report back. I've some salvage boards I might could get one working - this is a 6KW Onan, no?
--johnny
--
76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
"I forgive them all, save those who hurt the dogs. They must answer to me in hell" - ol Andy, paraphrased
--johnny
--
76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
"I forgive them all, save those who hurt the dogs. They must answer to me in hell" - ol Andy, paraphrased
6K and 4K use the same board.
On Mon, Dec 4, 2017 at 2:42 PM, Johnny Bridges via Gmclist <
> Execute the 9 to 5 test and report back. I've some salvage boards I might
> could get one working - this is a 6KW Onan, no?
>
> --johnny
> --
> 76 26' Eleganza(?) with beaucoup mods and add - ons.
> Braselton, Ga.
> "I forgive them all, save those who hurt the dogs. They must answer to me
> in hell" - ol Andy, paraphrased
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Jim Kanomata
Applied/GMC, Newark,CA
jimk
http://www.appliedgmc.com
1-800-752-7502
On Mon, Dec 4, 2017 at 2:42 PM, Johnny Bridges via Gmclist <
> Execute the 9 to 5 test and report back. I've some salvage boards I might
> could get one working - this is a 6KW Onan, no?
>
> --johnny
> --
> 76 26' Eleganza(?) with beaucoup mods and add - ons.
> Braselton, Ga.
> "I forgive them all, save those who hurt the dogs. They must answer to me
> in hell" - ol Andy, paraphrased
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Jim Kanomata
Applied/GMC, Newark,CA
jimk
http://www.appliedgmc.com
1-800-752-7502
Jim-
I know. There's way more 6s out there. Point being if it runs with the board bypassed, we can then try with the oil switch bypassed. Either that
or the board at that point. I've some salvage boards I can likely get one going for him, or he can tap you for a new one or a Dino.
--johnny
--
76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
"I forgive them all, save those who hurt the dogs. They must answer to me in hell" - ol Andy, paraphrased
I know. There's way more 6s out there. Point being if it runs with the board bypassed, we can then try with the oil switch bypassed. Either that
or the board at that point. I've some salvage boards I can likely get one going for him, or he can tap you for a new one or a Dino.
--johnny
--
76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
"I forgive them all, save those who hurt the dogs. They must answer to me in hell" - ol Andy, paraphrased
