The mounting bracket is a piece of .050 aluminum, 4.5" x about 20" or
so. I broke it in four places to make it lower the macerator 3.75". Every
one will be different according to how the 3.5" ell is angled when it's
glued in place.
I made mine point down just slightly so it would drain more of the tank.
btw, the 1.5" ell I used is a street ell.
I had never seen a bushing like that holding tank reducer. It has the
smaller hole offset to one side rather than it being in the center. This
makes the outlet as low as possible.
Hope this helps
bdub
Central Texas
76 Palm Beach
>Thanks Billy. Nice job. I printed copies for a shopping list and clear
>installation instructions. Do you recall the material and dimensions of the
>mounting bracket that you fabricated? Any interest in producing a few for
>resale?
>
>Chuck
>77 Kingsley
>North Idaho
>
>-----Original Message-----
>From: Billy Massey
>To: gmcmotorhome
>Date: Wednesday, November 17, 1999 4:27 PM
>Subject: GMC: macerator installation
>
>
> >I put some pics on the web of my macerator installation. They're at :
> >
> >
http://www.web-access.net/~bmassey/macerator/index.html
> >
> >it your interested.
> >
> >bdub
> >
>
