Anyone out there install a M&G 2.0 towd braking system on their Geo Tracker? Can we talk? I'd like to know how you did it.
--
Larry
78 Royale w/500 Caddy
Menomonie, WI.
--
Larry
78 Royale w/500 Caddy
Menomonie, WI.
M&G towd braking system install
- Thread starter LarryW
- Start date
M&G installed their 2.0 system in my Honda Fit. Yes, I know that does not address directly your question, but the 2.0 version is physically smaller
than their previous braking system. It may fit better. Parts are squeezed in the engine compartment. When they started the install, they predicted a
four hour install. It actually took six hours. A real shoehorn job.
Good luck.
Tom
--
2012 Phoenix Cruiser model 2552
KA4CSG
than their previous braking system. It may fit better. Parts are squeezed in the engine compartment. When they started the install, they predicted a
four hour install. It actually took six hours. A real shoehorn job.
Good luck.
Tom
--
2012 Phoenix Cruiser model 2552
KA4CSG
Tom, there are several brake system out there.
Havig one mounted in the toad is really a plus.
The way I use my oach, there are somtimes no timr to discommect the brake
system from the pedel and throw it in the back seat that is already full of
items.
I have had the unit in my different toads for over 35 years and never
regreated the cost.
It takes from 6-8 hours for most late model units.
Were an Authorized Dealer and Installer and do lot for the SOB units.
> M&G installed their 2.0 system in my Honda Fit. Yes, I know that does not
> address directly your question, but the 2.0 version is physically smaller
> than their previous braking system. It may fit better. Parts are squeezed
> in the engine compartment. When they started the install, they predicted a
> four hour install. It actually took six hours. A real shoehorn job.
>
> Good luck.
> Tom
>
> --
> 2012 Phoenix Cruiser model 2552
> KA4CSG
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Jim Kanomata
Applied/GMC, Newark,CA
jimk
http://www.appliedgmc.com
1-800-752-7502
Havig one mounted in the toad is really a plus.
The way I use my oach, there are somtimes no timr to discommect the brake
system from the pedel and throw it in the back seat that is already full of
items.
I have had the unit in my different toads for over 35 years and never
regreated the cost.
It takes from 6-8 hours for most late model units.
Were an Authorized Dealer and Installer and do lot for the SOB units.
> M&G installed their 2.0 system in my Honda Fit. Yes, I know that does not
> address directly your question, but the 2.0 version is physically smaller
> than their previous braking system. It may fit better. Parts are squeezed
> in the engine compartment. When they started the install, they predicted a
> four hour install. It actually took six hours. A real shoehorn job.
>
> Good luck.
> Tom
>
> --
> 2012 Phoenix Cruiser model 2552
> KA4CSG
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Jim Kanomata
Applied/GMC, Newark,CA
jimk
http://www.appliedgmc.com
1-800-752-7502
