Looking for dash tags/labels

[jerry burt]

Are these tags/labels available from someone in the community or were they a one-off by a PO?
They seem to be glued onto the original inserts and are not lit. I am missing the headlight and Bat Boost tags.

http://www.gmcmhphotos.com/photos/misc/p62159-dash-tags.html

--
Patti & Jerry Burt
73 Gmc 26' Canyon Lands -
Photos - http://jburt.smugmug.com/GMC-Motorhome
Lots of upgrades but lots to do to make it ours.
Members: FMCA - GMCMI - GMCWS - Pacific Cruisers - 49ers

 

[bdub1]

Try these

http://www.gmcmotorhomemarketplace.com/novak/

-----Original Message-----
From: Gmclist On Behalf Of Jerry Burt
Sent: Thursday, February 16, 2017 6:30 PM

Are these tags/labels available from someone in the community or were they a
one-off by a PO?
They seem to be glued onto the original inserts and are not lit. I am missing
the headlight and Bat Boost tags.

http://www.gmcmhphotos.com/photos/misc/p62159-dash-tags.html

 

[jerry burt]

Thanks Billy. What I need is 2 or 3 of the OEM black plastic frames. I don't need them to be lighted. I intend to redo the dash eventually so I just
want to temporarily fill the holes I have missing. I can always relabel them as needed.

> Try these
>
> http://www.gmcmotorhomemarketplace.com/novak/
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

--
Patti & Jerry Burt
73 Gmc 26' Canyon Lands -
Photos - http://jburt.smugmug.com/GMC-Motorhome
Lots of upgrades but lots to do to make it ours.
Members: FMCA - GMCMI - GMCWS - Pacific Cruisers - 49ers

 

[thomas phipps]

Call out the 3D printers. Another great low production rate reproduction idea.
Very nice labels can be made with the Brother P-Touch label maker.
Tom, MS II
--
1975 GMC Avion
KA4CSG

 

[jerry burt]

Hmmm... Thanks. May be a good reason to invest in a 3D printer and some software.

> Call out the 3D printers. Another great low production rate reproduction idea.
> Very nice labels can be made with the Brother P-Touch label maker.
> Tom, MS II

--
Patti & Jerry Burt
73 Gmc 26' Canyon Lands -
Photos - http://jburt.smugmug.com/GMC-Motorhome
Lots of upgrades but lots to do to make it ours.
Members: FMCA - GMCMI - GMCWS - Pacific Cruisers - 49ers

 

[Terry Taylor]

I started working on designing those bezels once before, I will try to get back on it soon.

The HARD part is the little metal clips that hold the bezels and fiber optic cable in place,

My original thought was to design a replacement with an LED inside vice the fiber optic.

> Call out the 3D printers. Another great low production rate reproduction idea.
> Very nice labels can be made with the Brother P-Touch label maker.
> Tom, MS II

 

[LQQKatJon]

If you need labels off a Brother label maker. send me an email, I do have one, and it actually talks to my Laptop via wireless. I am no master at
using it, but if it can do what you need, I can give it a try.

it is one of the edge models:

http://www.brother-usa.com/mobile/lp/ptedge/ptedge_models.aspx

--
Jon Roche
75 palm beach
St. Cloud, MN
http://lqqkatjon.blogspot.com/

 

[jerry burt]

Thanks all. I just want some bezels to temporarily cleanup the dash until I rebuild the entire dash. The existing labels are engraved plastic glued to
the bezels. I didn't know if they were available somewhere or done by the PO.
I'm just trying to cleanup a PO redo until I can do my own. My plan is to convert to electric wipers on the column, full gauges, different heating/ac
controls, etc. So, the labels and lighting won't be needed.
--
Patti & Jerry Burt
73 Gmc 26' Canyon Lands -
Photos - http://jburt.smugmug.com/GMC-Motorhome
Lots of upgrades but lots to do to make it ours.
Members: FMCA - GMCMI - GMCWS - Pacific Cruisers - 49ers