locktite

[bill & joan satterfield]

Was some dicussion some months back about a locktite product that would
build up metal surfaces. Anyone know what it is and how good it
works? Wonder if it could be used to build up front spindle about a
whisker or if I'm headed for machine shop monday. TIA
Bill

 

[rob teed]

Better head to the machine shop!
Rob Teed

> -----Original Message-----
> From: owner-gmcmotorhome
> [mailtowner-gmcmotorhome]On Behalf Of Bill
> Satterfield
> Sent: Saturday, September 25, 1999 4:08 PM
> To: gmcmotorhome
> Subject: GMC: locktite
>
>
> Was some dicussion some months back about a locktite product that would
> build up metal surfaces. Anyone know what it is and how good it
> works? Wonder if it could be used to build up front spindle about a
> whisker or if I'm headed for machine shop monday. TIA
> Bill
>
>
________________________________________________________
NetZero - We believe in a FREE Internet. Shouldn't you?
Get your FREE Internet Access and Email at
http://www.netzero.net/download/index.html

 

[bill & joan satterfield]

Advise taken
Bill

>
> > Wonder if it could be used to build up front spindle about a
> > whisker or if I'm headed for machine shop monday.
>
> Bill,
> Loctite has several products for repairing stripped threads, etc. Most of
> them say not for critical applications. Loctite "red" Stud 'n Bearing Mount
> might get you by, but I wouldn't trust it as a permanent fix. Off to the
> machine shop, I'd say. ;-(
>
> Rick Staples
> '75 Eleganza
> Louisville, CO

 

[darren paget]

Bill. Let me know how much they charge you to make up a spindle.
Darren

>
> Advise taken
> Bill
>

>

> >
> > > Wonder if it could be used to build up front spindle about a
> > > whisker or if I'm headed for machine shop monday.
> >
> > Bill,
> > Loctite has several products for repairing stripped threads, etc. Most of
> > them say not for critical applications. Loctite "red" Stud 'n Bearing Mount
> > might get you by, but I wouldn't trust it as a permanent fix. Off to the
> > machine shop, I'd say. ;-(
> >
> > Rick Staples
> > '75 Eleganza
> > Louisville, CO

- --
Darren Paget
76 Experimental
Another Fab Day
paget
http://www.TZEplus.com

 

[bill & joan satterfield]

Darren Try 65.00 per side plus tax.
Bill

> Bill. Let me know how much they charge you to make up a spindle.
> Darren
>

> >
> > Advise taken
> > Bill
> >

> >

> > >
> > > > Wonder if it could be used to build up front spindle about a
> > > > whisker or if I'm headed for machine shop monday.
> > >
> > > Bill,
> > > Loctite has several products for repairing stripped threads, etc. Most of
> > > them say not for critical applications. Loctite "red" Stud 'n Bearing Mount
> > > might get you by, but I wouldn't trust it as a permanent fix. Off to the
> > > machine shop, I'd say. ;-(
> > >
> > > Rick Staples
> > > '75 Eleganza
> > > Louisville, CO
>
> --
> Darren Paget
> 76 Experimental
> Another Fab Day
> paget
> http://www.TZEplus.com

 

[darren paget]

Figured it out today. Without doors or face frames or bottom shelf,
18 Haven't had a chance to weigh the old OEM one. All the stuff above
included will bring weight to about 20 That is a 68" cabinet
shown. Darren

>
> In a message dated 9/26/99 1:52:56 PM Eastern Daylight Time,

>
> > http://www.TZEplus.com
> Hi Darren!
> You have got some great ideas, I hope they pan out for you. I like your
> overhead cabinet idea. What is the weight of the one shown on the webpage,
> without the doors?
>
> Scott NEHODA'S
> BACK YARD

- --
Darren Paget
76 Experimental
Another Fab Day
paget
http://www.TZEplus.com