Leigh Harrison brake part info.

[Bill Bryant]

I am going to leave for a GMC Nor'Easter rally in a couple of days (hopefully) and needed an 80mm R rear caliper for my Leigh Harrison disk brakes.
Being in a rush I went to my local parts guy and thought I could get a quick match. As I recall, it is supposed to be from a late 70s Chevy pickup.
Can anyone confirm a P/N or original vehicle usage?
The L front & R rear use the same caliper.

I would normally order my parts from a GMC MH source but thought this would be quicker.
Thanks for your help,
Bill
--
Bill Bryant
1976~PB
1914 Ford
1965 Corvette
GMC MH History CD & GMC Showroom DVD
Workprint DVD GMC development 11-70 to 3-71
http://bdub.net/billbryant/

 

[jim kanomata1]

Bill,
If it has the Banjo fitting, that should work.

On Sat, Sep 10, 2016 at 2:42 PM, Bill Bryant
wrote:

> I am going to leave for a GMC Nor'Easter rally in a couple of days
> (hopefully) and needed an 80mm R rear caliper for my Leigh Harrison disk
> brakes.
> Being in a rush I went to my local parts guy and thought I could get a
> quick match. As I recall, it is supposed to be from a late 70s Chevy
> pickup.
> Can anyone confirm a P/N or original vehicle usage?
> The L front & R rear use the same caliper.
>
> I would normally order my parts from a GMC MH source but thought this
> would be quicker.
> Thanks for your help,
> Bill
> --
> Bill Bryant
> 1976~PB
> 1914 Ford
> 1965 Corvette
> GMC MH History CD & GMC Showroom DVD
> Workprint DVD GMC development 11-70 to 3-71
> http://bdub.net/billbryant/
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>

--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk
http://www.appliedgmc.com
1-800-752-7502

 

[wally anderson]

> I am going to leave for a GMC Nor'Easter rally in a couple of days (hopefully) and needed an 80mm R rear caliper for my Leigh Harrison disk
> brakes. Being in a rush I went to my local parts guy and thought I could get a quick match. As I recall, it is supposed to be from a late 70s Chevy
> pickup. Can anyone confirm a P/N or original vehicle usage?
> The L front & R rear use the same caliper.
>
> I would normally order my parts from a GMC MH source but thought this would be quicker.
> Thanks for your help,
> Bill

84 Chevrolet C-20 with JB-7 brakes, front "80MM" caliper. Banjo fitting with 3-5/32" Piston and D-52 mount.
HTH
--
Wally Anderson
1975 Glenbrook
Megasquirt 455 port injection science project
Omaha Nebraska
Bob Stone hydroBOOOOST
Greater Midwest Classics
GMCES
http://wallyandsue.blogspot.com/

 

[Bill Bryant]

Thanks for the info :^)

NOTE:
By the way, I plan to bring many of my extra GMCMH Collectables for sale at the Mansfield,OH rally. Time to move on.....:^(

Bill
--
Bill Bryant
1976~PB
1914 Ford
1965 Corvette
GMC MH History CD & GMC Showroom DVD
Workprint DVD GMC development 11-70 to 3-71
http://bdub.net/billbryant/