Jabsco Macerator for RV's

[william d. minor]

For those concerned by the inlet/outlet sizes on the West marine
macerator that is on sale until April 4th @ $119 ($30 off)

Please read the following E-mail from ITT Jabsco regarding the 18590
Macerator. The Macerator at West Marine is the proper one!!

Bill Minor
'73 Sequoia 230
Waukegan,Illinois

- -------- Original Message --------
Subject: Re: Request for Information
Date: Tue, 30 Mar 1999 09:36:16 -0600
From: "Keith Evans"
To: wdminor

The diameter of the housing is 3" and this is what we sell for RV
applications. You may need to remove the threaded and hose barb section
to facilitate easier installation
Keith Eavns

>>> Jabsco WWW Web Site at INTERNET 03/30 5:15 AM >>>
Request type:Marine
Name: William
Last Name: Minor

City,State,Zip:Waukegan, IL, 60087
Country: USA
Email: wdminor

Product Info Req.:

Do You make a conversion for the 18590 Macerator to utilize 3-inch inlet
rather than the 1 1/2-inch? I am installing the macerator in my
motorhome and the 3-inch inlet would improve its capabilites in regards
to emptying the holding tank.

Thank You!!

 

[thomas g. warner]

correct number for the Jabsco pump is 18590-000. You need the last three
zeros or the girl gets confused.It is $119 plus $7.50 shipping.

>For those concerned by the inlet/outlet sizes on the West marine
>macerator that is on sale until April 4th @ $119 ($30 off)
>
>Please read the following E-mail from ITT Jabsco regarding the 18590
>Macerator. The Macerator at West Marine is the proper one!!
>
>Bill Minor
>'73 Sequoia 230
>Waukegan,Illinois
>
>
>
>-------- Original Message --------
>Subject: Re: Request for Information
>Date: Tue, 30 Mar 1999 09:36:16 -0600
>From: "Keith Evans"
>To: wdminor
>
>The diameter of the housing is 3" and this is what we sell for RV
>applications. You may need to remove the threaded and hose barb section
>to facilitate easier installation
>Keith Eavns
>
>>>> Jabsco WWW Web Site at INTERNET 03/30 5:15
AM >>>
>Request type:Marine
>Name: William
>Last Name: Minor
>
>City,State,Zip:Waukegan, IL, 60087
>Country: USA
>Email: wdminor
>
>Product Info Req.:
>
>Do You make a conversion for the 18590 Macerator to utilize 3-inch inlet
>rather than the 1 1/2-inch? I am installing the macerator in my
>motorhome and the 3-inch inlet would improve its capabilites in regards
>to emptying the holding tank.
>
>Thank You!!
>
>
Tom & Marg Warner
Vernon Center NY
1976 palmbeach

 

[bartz paul]

If you go to:
http://store.westmarine.com/acb/showdetl.cfm?&DID 15&Product_ID 6742=
0&CATID
4968, you can see the details on the pump.

The last three zero's tell you that it is manufacturer's number for the =
12 V
model, vs. 24 and 32 V units.

For those who have installed a macerator pump, where did you pick up =
power
to operate it and where did you mount the switch?? I assume a switch =
does
not come with the pump and must be obtained elsewhere??? I plan to use =
a
waterproof one from Painless Wiring (see
http://www.painlesswiring.com/switches.htm).

Paul Bartz

From: Thomas G. Warner [mailto:warner]
Sent: Wednesday, March 31, 1999 2:10 PM
Subject: Re: GMC: Jabsco Macerator for RV's

correct number for the Jabsco pump is 18590-000. You need the last =
three
zeros or the girl gets confused.It is $119 plus $7.50 shipping.

For those concerned by the inlet/outlet sizes on the West marine =
macerator
that is on sale until April 4th @ $119 ($30 off)
Please read the following E-mail from ITT Jabsco regarding the 18590
Macerator. The Macerator at West Marine is the proper one!!
Bill Minor
Subject: Re: Request for Information
Date: Tue, 30 Mar 1999 09:36:16 -0600
From: "Keith Evans"
The diameter of the housing is 3" and this is what we sell for RV
applications. You may need to remove the threaded and hose barb section =
to
facilitate easier installation
Keith Eavns
Jabsco WWW Web Site at INTERNET 03/30 5:15 AM
Request type:Marine
Name: William
Last Name: Minor
City,State,Zip:Waukegan, IL, 60087
Country: USA
Email: wdminor =20

Product Info Req.:
Do You make a conversion for the 18590 Macerator to utilize 3-inch =
inlet
rather than the 1 =BD-inch? I am installing the macerator in my =
motorhome
and the 3-inch inlet would improve its capabilites in regards to =
emptying
the holding tank.

 

[david l greenberg]

>For those who have installed a macerator pump, where did you pick up
>power
>to operate it and where did you mount the switch?? I assume a switch
>does
>not come with the pump and must be obtained elsewhere??? I plan to
>use a
>waterproof one from Painless Wiring (see
>http://www.painlesswiring.com/switches.htm).
>
> Paul Bartz
>
I picked up power from inside the hanging locker (on a GMC interior)
Remove the back wall (very easy) and you will find wiring there. My
switch is mouted right next too and slightly above the city water inlet.
This keeps it out of the way of the hose and enables it to be locked up
so some passerby doesn't flick on the switch.

I used a weather proof switch with, I think, a 20 amp rating and added an
in-line fuse.

David Lee Greenberg
GMC Motorhome Registry
and Boston Homes, Inc.
800-827-9989

 

[richard missett]

I called the 1-800-BOATING (262-8464) this afternoon to order the
18590-000 pump . I was told that it listed for $199 and the current
price is $149 . Did I call the wrong place ? The person I spoke to was
in CA (West Marine)
Would not honor the $119 (Sale until April 4)without checking with
supervisor. I was on the road and couldn't wait for reply. Anyone else
have same problem? I hope to try again before the Sale (?) deadline TIA

Dick Missett
73 Seq
Wyoming PA

 

[herm beeck]

Could it be that there is a difference between in store sale prices and
catalog prices. I have run into this problem with West Marine. Duane
probably walked to the closest outlet.

> I called the 1-800-BOATING (262-8464) this afternoon
> to order the
> 18590-000 pump . I was told that it listed for $199
> and the current
> price is $149 . Did I call the wrong place ? The
> person I spoke to was
> in CA (West Marine)
> Would not honor the $119 (Sale until April 4)without
> checking with
> supervisor. I was on the road and couldn't wait for
> reply. Anyone else
> have same problem? I hope to try again before the
> Sale (?) deadline TIA
>
> Dick Missett
> 73 Seq
> Wyoming PA
>
>
>

_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com

 

[dave melton cst-7 5-4682]

>I called the 1-800-BOATING (262-8464) this afternoon to order the
>18590-000 pump . I was told that it listed for $199 and the current
>price is $149 . Did I call the wrong place ? The person I spoke to was
>in CA (West Marine)
>Would not honor the $119 (Sale until April 4)without checking with
>supervisor. I was on the road and couldn't wait for reply. Anyone else
>have same problem? I hope to try again before the Sale (?) deadline TIA
>
>Dick Missett
>73 Seq
>Wyoming PA

I ordered one from this number on Tuesday and they gave me the $119 price.
Their web site has it for $149, but when I called they priced it at $119.

Dave Melton
1975 GMC
26' Palm Beach
Espanola N.M.

 

[bartz paul]

I too, ordered one using their web site and got a $149 price. Called the
800 number listed on the order confirmation sheet and talked to them. They
honored the $119 price. Apparently that's in a sales flyer.

Paul Bartz

From: DAVE MELTON, CST-7, 5-4682 [mailto:dlm]
Sent: Friday, April 02, 1999 8:58 AM
To: gmcmotorhome
Subject: Re: GMC: Jabsco Macerator for RV's

I called the 1-800-BOATING (262-8464) this afternoon to order the 18590-000
pump. I was told that it listed for $199 and the current price is $149 .
Did I call the wrong place? The person I spoke to was in CA (West Marine).
Would not honor the $119 (Sale until April 4)without checking with
supervisor. I was on the road and couldn't wait for reply.

Anyone else have same problem?

I hope to try again before the Sale (?) deadline TIA

Dick Missett

I ordered one from this number on Tuesday and they gave me the $119 price.
Their web site has it for $149, but when I called they priced it at $119.

 

[thomas g. warner]

I ordered mine Wednesday and talked with Elizabeth in special orders. The
correct JABSCO # is 18590-000 however THEIR part number is 195503. Price
was $119.95 plus shipping.

>I called the 1-800-BOATING (262-8464) this afternoon to order the
>18590-000 pump . I was told that it listed for $199 and the current
>price is $149 . Did I call the wrong place ? The person I spoke to was
>in CA (West Marine)
>Would not honor the $119 (Sale until April 4)without checking with
>supervisor. I was on the road and couldn't wait for reply. Anyone else
>have same problem? I hope to try again before the Sale (?) deadline TIA
>
>Dick Missett
>73 Seq
>Wyoming PA
>
>
>
>
Tom & Marg Warner
Vernon Center NY
1976 palmbeach

 

[richard missett]

Thanks to all for input . I was finally able to place order at the $119
price. If anyone else
orders you can speed the process by referring to sales flyer 3525 ABRS.
They take orders 24 hrs a day.(Sale until April 4)

Dick Missett
73 seq
Wyoming PA