Interior Ideas -NOW DOORS GOING BAD!

[richard waters]

> Chip
> We noticed that the laminate on the Bath and Wardrobe door was starting to
> peel and found that the doors in our 77 PB are just a frame and hollow
> inside and without much pressure found that a knife inserted between the
> frame and laminate seperated the frame very easily.

I noticed my bathroom door is starting to delaminate at the top.
I sure would to "nip that in the bud" before is gets any worse.

Does anyone have a fix for delaminating interior doors?
Richard Waters '76 PB, Troy, MI

 

[marlene meineken]

We bought some stuff called The All Purpose Welder at Wall-Mart. It's clear
and in a tube . All I did was squeeze some in and used a toothpick to
distribute it up and down used a clamp overnight and it is sticking really
well.
Marlene Meineken
- ----- Original Message -----
From: Richard Waters
To:
Sent: Thursday, February 10, 2000 3:36 PM
Subject: Re: GMC: Interior Ideas -NOW DOORS GOING BAD!

>
>

>
> > Chip
> > We noticed that the laminate on the Bath and Wardrobe door was starting
to
> > peel and found that the doors in our 77 PB are just a frame and hollow
> > inside and without much pressure found that a knife inserted between the
> > frame and laminate seperated the frame very easily.
>
> I noticed my bathroom door is starting to delaminate at the top.
> I sure would to "nip that in the bud" before is gets any worse.
>
> Does anyone have a fix for delaminating interior doors?
> Richard Waters '76 PB, Troy, MI
>
>
>
>
>

 

[thomas g. warner]

Put a clothes iron on medium heat and use a cloth under the iron and try to
restick the laminate.

>
>

>
>> Chip
>> We noticed that the laminate on the Bath and Wardrobe door was starting to
>> peel and found that the doors in our 77 PB are just a frame and hollow
>> inside and without much pressure found that a knife inserted between the
>> frame and laminate seperated the frame very easily.
>
>I noticed my bathroom door is starting to delaminate at the top.
>I sure would to "nip that in the bud" before is gets any worse.
>
>Does anyone have a fix for delaminating interior doors?
>Richard Waters '76 PB, Troy, MI
>
>
>
>
>
>

 

[richard waters]

> We bought some stuff called The All Purpose Welder at Wall-Mart. It's clear
> and in a tube . All I did was squeeze some in and used a toothpick to
> distribute it up and down used a clamp overnight and it is sticking really
> well.
> Marlene Meineken
> ----- Original Message -----
>
> Subject: Re: GMC: Interior Ideas -NOW DOORS GOING BAD!
> >
> > I noticed my bathroom door is starting to delaminate at the top.
> > I sure would to "nip that in the bud" before is gets any worse.
> >
> > Does anyone have a fix for delaminating interior doors?
> > Richard Waters '76 PB, Troy, MI

Marlene,
Thanks for the tip. I'll get right over to Wall-Mart and get
some.
Richard Waters

 

[alan bredbury]

I repaired mine with contact cement however they are
slated for replacement in my unit with wood (I don't
care if they weigh more).


> Chip We noticed that the laminate on the Bath and
>Wardrobe door was starting to peel and found that the
>doors in our 77 PB are just a frame and hollow inside
>and without much pressure found that a knife inserted
>between the frame and laminate seperated the frame
>very easily.
>I noticed my bathroom door is starting to delaminate
>at the top. I sure would to "nip that in the bud"
>before is gets any worse. Does anyone have a fix for
>delaminating interior doors?
>Richard Waters '76 PB, Troy, MI

__________________________________________________
Do You Yahoo!?
Talk to your friends online with Yahoo! Messenger.
http://im.yahoo.com