Heinz since you are going to be in california any chance of stopping at Joe
Mondellos shop and looking at his GMC engines and tranny parts? He has a 455
engine with all of the good stuff in it for the GMC motorhome for $5800.
Acording to his book it puts out 400-450HP and 440-450 ft lbs of torque. Whew!
His address is 1103 Paso Robles St,Paso Rables, CA, 93446. 805-237-8808.
It would be nice to get an opinion of his shop. Maybe they could do the
generator?
>I'm hoping to take delivery of my EV6010 in Sacramento CA late Feb/early
>March.
>
>I'm going to remove the Onan prior to leaving home.
>
>I'd really like to install it before getting back home as it'd be nice to
>have it's use during the next trip instead of it taking up space inside as
>freight.
>
>I'm open to any suggestions as to a facility that might undertake it. By
>facility I mean GMC shop, GMCer recommended shop, fellow GMCer with facility
>and local 'connections', etc. etc. [g]
>
>While somewhere in California is preferred, I'd consider anyplace
>'en-route'. As early in the route as possible would of course be preferred.
>
>Itinerary: Home --> Sacramento -- Stockton -- LA -- Dallas -- Home. No
>adversion to detours to get the job done.
>
>Open to all ideas and offers
>
>Thanks in advance
>Heinz
>
>
>
Tom & Marg Warner
Vernon Center NY
1976 palmbeach
Mondellos shop and looking at his GMC engines and tranny parts? He has a 455
engine with all of the good stuff in it for the GMC motorhome for $5800.
Acording to his book it puts out 400-450HP and 440-450 ft lbs of torque. Whew!
His address is 1103 Paso Robles St,Paso Rables, CA, 93446. 805-237-8808.
It would be nice to get an opinion of his shop. Maybe they could do the
generator?
>I'm hoping to take delivery of my EV6010 in Sacramento CA late Feb/early
>March.
>
>I'm going to remove the Onan prior to leaving home.
>
>I'd really like to install it before getting back home as it'd be nice to
>have it's use during the next trip instead of it taking up space inside as
>freight.
>
>I'm open to any suggestions as to a facility that might undertake it. By
>facility I mean GMC shop, GMCer recommended shop, fellow GMCer with facility
>and local 'connections', etc. etc. [g]
>
>While somewhere in California is preferred, I'd consider anyplace
>'en-route'. As early in the route as possible would of course be preferred.
>
>Itinerary: Home --> Sacramento -- Stockton -- LA -- Dallas -- Home. No
>adversion to detours to get the job done.
>
>Open to all ideas and offers
>
>Thanks in advance
>Heinz
>
>
>
Tom & Marg Warner
Vernon Center NY
1976 palmbeach
