Hub nut

[6cuda61]

I just want to confirm, before i drive 1.5hr to my tool box in storage that the axle nut needs a 1.5 inch or 38mm socket to fit it.....is this
correct?
--
Rich Mondor,

Brockville, ON

77 Hughes 2600

 

[charles boyd]

Yes Sir.

1.5 inch or 38mm socket to fit it.....is this correct?[/quote]

--
C. Boyd
76 Crestmont
East Tennessee

 

[6cuda61]

Thank you Sir

> Yes Sir.
>
>
>
>
>

> a 1.5 inch or 38mm socket to fit it.....is this correct?

[/quote]

--
Rich Mondor,

Brockville, ON

77 Hughes 2600

 

[charles boyd]

You are welcome. The only exception I have ever seen is a new CV that was on a rebuilt axel for a Tornado from Advance Auto. 10 years or so ago I
ordered 10 sets when we were first starting to have trouble with the wrong spline count and I wanted to get some spares while I could. Out of the 10
axels I could only use 3, the rest were returned with wrong spline count and a round inner joint. One in the bunch had a 1 1/4” nut and was new,
not rebuilt. GM-812 was on the joint. Inner split ring was a real bear to unlock.

http://www.gmcmhphotos.com/photos/cv-joints/p51384-1-1-2f4-26quot-3b-end-nut-size.html

> Thank you Sir
>

> > Yes Sir.
> >
> >
> >
> >
> >

> > needs a 1.5 inch or 38mm socket to fit it.....is this correct?

[/quote]
--
C. Boyd
76 Crestmont
East Tennessee