Doing it this way saves a bit of time and work but you have to lay down
and reach behind the hub to remove some bolts that hold it to the
knuckle assembly.
Emery & MKM,
One of the things we did to make it "easier" next time was to replace
the bolts that hold the hub to the knuckle assembly with Allen head
bolts. Much easier to get a wrench on.
HTH,
Steve Ferguson
San Diego
and reach behind the hub to remove some bolts that hold it to the
knuckle assembly.
Emery & MKM,
One of the things we did to make it "easier" next time was to replace
the bolts that hold the hub to the knuckle assembly with Allen head
bolts. Much easier to get a wrench on.
HTH,
Steve Ferguson
San Diego
