> what is causing the pulsing in my water system? sur-flo pump....only using tank and pump , no outside connection. happens in either sink and
> with either hot or cold
Ron,
I am unsure what you mean by pulsing.
If it is very high frequency, I have seen this when a triplex or quad pump failed an internal valve. The pulse is very fast two or three times a
second.
I have seen the lower frequency like three or four seconds per pulse and that was just the natural frequency of a system with no hysteresis (dead
band) in the pumps pressure control.
That any help?
Matt
--
Matt & Mary Colie - '73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan
OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Twixt A2 and Detroit