Holding tank sender

[dick kennedy]

I'm in need of a new sender for the blackwater tank. Does anyone know of a
source that can match the original? The gauge part seems to work ok.

When I showed the old one to our local RV guy he told me that it was from a
GMC. Then he went on to say that he hadn't seen one for 20 years. Help.....

Dick

 

[hdavis]

>I'm in need of a new sender for the blackwater tank. Does anyone know of a
>source that can match the original? The gauge part seems to work ok.
>
>When I showed the old one to our local RV guy he told me that it was from a
>GMC. Then he went on to say that he hadn't seen one for 20 years. Help.....
>

They're available from Cinnabar and I think Golby's.

Henry

Henry Davis Consulting, Inc / new product consulting
PO Box 1270 / product readiness reviews
Soquel, Ca 95073 / IP reviews
ph: (831) 462-5199 / full service marketing
fax: (831) 462-5198
http://www.henry-davis.com/ http://www.henry-davis.com

 

[jim bounds1]

Dick,

I would like to further support Emories words. The sender Golby has for
the fresh & holding tanks seem to have proven them selves to be a good
design.

Many people have used them with good results. The only mishap was when
some paper got wrapped around the float, use the proper paper and
everything is cool.

Jim Bounds
- ------------------

>

>
>
>Dick >>
>
>
>
>Dick - Golby has a model that will directly bolt in as a replacement. Their
>sender is a bit different in that the circuit is outside of the float unit.
>It is magnetically coupled so that there is no moisture in contact with the
>sending unit and you don't have to worry about corrosion. I've had mine in
>now for a couple of years now and it works fine. They also have a model for
>the water tank.
>
>Emery Stora
>77 Kingsley
>Santa Fe, NM
>
>

 

[dick kennedy]

Thanks for the input guys. It's the end of the season so I think I'll keep
the 90 bucks in the bank and stay with my calibrated stick for now. I'll
keep these posts and order it in the spring.

Dick

>Dick,
>
>I would like to further support Emories words. The sender Golby has for
>the fresh & holding tanks seem to have proven them selves to be a good
>design.
>
>Many people have used them with good results. The only mishap was when
>some paper got wrapped around the float, use the proper paper and
>everything is cool.
>
>Jim Bounds
>------------------

>>

>>
>>>
>>Dick >>
>>
>>
>>
>>Dick - Golby has a model that will directly bolt in as a replacement.
Their
>>sender is a bit different in that the circuit is outside of the float
unit.
>>It is magnetically coupled so that there is no moisture in contact with the
>>sending unit and you don't have to worry about corrosion. I've had mine in
>>now for a couple of years now and it works fine. They also have a model
for
>>the water tank.
>>
>>Emery Stora
>>77 Kingsley
>>Santa Fe, NM
>>
>>
>
>