HELP WANTED WHEEL BEARING EXPERIANCE FRONT & REAR

[marlene meineken]

Help Wanted someone with experiance with wheel bearings. We have the Warner
Tool and will act as helper and gopher.
In exchange for parking, electrical hookup, & 3 meals a day (might even buy
the Beer). I will also WASH & WAX (you supply your choice of wax)
your GMC.
If you are traveling Hwy. 95 in Northern Idaho (Lewiston area) or going to
the Western States Rally in Newport, Wash. (Diamond Lake). You won't be far
away.
Marlene Meineken

 

[ronald b. kazi]

I have heard that if the tool does not get used, it can get rusty. I am keeping
mine in a sealed plastic bag inside a Sears tool box under the fridge until I
need it again. By then, I will have a new driveway.

Ron and Julie

> Excuse me please. I believe what you mean is that you have the Warner front
> wheel bearing puller, NOT the warner tool! My wife read that and could not
> stop laughing.
>

> >Help Wanted someone with experiance with wheel bearings. We have the Warner
> >Tool and will act as helper and gopher.
> >In exchange for parking, electrical hookup, & 3 meals a day (might even buy
> >the Beer). I will also WASH & WAX (you supply your choice of wax)
> >your GMC.
> >If you are traveling Hwy. 95 in Northern Idaho (Lewiston area) or going to
> >the Western States Rally in Newport, Wash. (Diamond Lake). You won't be far
> >away.
> >Marlene Meineken
> >
> >
> >
> >
> >

 

[marlene meineken]

Yes Tom that is what I meant SORRY At least I made your wife's day. I knew I
was writing it wrong when I typed it but didn't think any one would notice
OH WELL.
Marlene
- ----- Original Message -----
From: tom warner
To:
Sent: Monday, May 01, 2000 1:52 PM
Subject: Re: GMC: HELP WANTED WHEEL BEARING EXPERIANCE FRONT & REAR

> Excuse me please. I believe what you mean is that you have the Warner
front
> wheel bearing puller, NOT the warner tool! My wife read that and could not
> stop laughing.
>
>
>
>
>

> >Help Wanted someone with experiance with wheel bearings. We have the
Warner
> >Tool and will act as helper and gopher.
> >In exchange for parking, electrical hookup, & 3 meals a day (might even
buy
> >the Beer). I will also WASH & WAX (you supply your choice of wax)
> >your GMC.
> >If you are traveling Hwy. 95 in Northern Idaho (Lewiston area) or going
to
> >the Western States Rally in Newport, Wash. (Diamond Lake). You won't be
far
> >away.
> >Marlene Meineken
> >
> >
> >
> >
> >
>
>

 

[david l greenberg]

On Mon, 1 May 2000 13:22:11 -0700 "Marlene Meineken"

> Help Wanted someone with experiance with wheel bearings. We have the
> Warner Tool and will act as helper and gopher. In exchange for parking,
electrical hookup, & 3 meals a day (might even buy the Beer). I will
also WASH & WAX (you supply your choice of wax) your GMC.


That last one really grabbed me! I am on my way.......but, did I mention
that I am severely mechanically challenged?

David Lee Greenberg
GMC Motorhome Registry
Dedicated to the preservation of the Classic GMC
http://www.gmcss.com/registry.htm

 

[ronald b. kazi]

Good point. Level, jackstand base....got it.

Thanks.

RON

>
> > By then, I will have a new driveway.
>
> Ron,
> When pouring your new driveway, remember to add reinforcing or an extra 2"
> thickness for durability (read: solid base for jack stands). If you have
> room, a dead-level section makes it a lot easier to adjust torsion bars,
> alignment, etc.
> See, this can be a win-win thing! Good luck.
>
> Rick Staples
> '75 Eleganza
> Louisville, CO

 

[john szalay]

>
>> By then, I will have a new driveway.
>
>Ron,
> When pouring your new driveway, remember to add reinforcing or an extra
2"
>thickness for durability (read: solid base for jack stands).


FWIW: I use and carry for that purpose, a set of 1/4" 10" X 10" 6061
flat Aluminum plates. they make a solid pad for jacks and/or jackstands.
No telling when you will have the misfortune of a flat.
I carry them in the LP tank compartment. Light weight but strong.

John & Brenda Szalay
73 Wild Blue Yonder

 

[rob teed]

Yes, I needed to jack the front wheel in the Keys...
The jackstand sunk into the ground..Probably the
only 8square inch's of soft soil in all the Keys.LOL
Rob Teed 74 Painted Desert

> -----Original Message-----
> From: owner-gmcmotorhome
> [mailtowner-gmcmotorhome]On Behalf Of John Szalay
> Sent: Wednesday, May 03, 2000 10:31 PM
> To: gmcmotorhome
> Subject: Re: GMC: HELP WANTED WHEEL BEARING EXPERIANCE FRONT & REAR
>
>

> >
> >> By then, I will have a new driveway.
> >
> >Ron,
> > When pouring your new driveway, remember to add reinforcing
> or an extra
> 2"
> >thickness for durability (read: solid base for jack stands).
>
>
> FWIW: I use and carry for that purpose, a set of 1/4" 10" X 10" 6061
> flat Aluminum plates. they make a solid pad for jacks and/or jackstands.
> No telling when you will have the misfortune of a flat.
> I carry them in the LP tank compartment. Light weight but strong.
>
> John & Brenda Szalay
> 73 Wild Blue Yonder
>

_____________________________________________
NetZero - Defenders of the Free World
Click here for FREE Internet Access and Email
http://www.netzero.net/download/index.html