Help needed now!! Attaching a large Sat dish

mr.c

New member
Jul 11, 1998
494
0
0
When I did my ceiling, I came up with a few photos showing where things
were on the roof joints and where the main struts were. If you want, call
me and I can perhaps send you some of the negatives to help you with the
installation

Al Chernoff 505-821-0693 or mr.c

> I am about to put this monster Sat dish up today. I know where the main
> rafter is and I am putting it between the two AC units on the 5th
> rafter. It is large(4ft) and a great sail to catch the wind even when
> it down and flat against the roof. Because of the size I have to mount
> it at an angle. I can get 3 bolts into the rafter and am looking for
> suggestions as to what to mount it with. The interioir is finished with
> 1/4 plywood covered with a wall carpet. Any suggestions for the type of
> toggle or blind nut to use? Should I cut an access hole in the ceiling
> and put lock nuts and add an interior brace? HELP!!
>
> I do not need this thing coming of at 75 MPH. That could ruin a persons
> day. If you have suggestions call me at 800-775-2537. I will be here
> all weekend during the day until 5.
>
> Marcus