I see a lot of traffic concerning the control module in the HEI. I
learned a lesson on this some time ago back in 89. The problem was
spark plug gap. I think I mentioned this once befor but any way try
.0060 or .0065 instead of the .0080 that is advertised and written
about. Chuck in Lompoc
learned a lesson on this some time ago back in 89. The problem was
spark plug gap. I think I mentioned this once befor but any way try
.0060 or .0065 instead of the .0080 that is advertised and written
about. Chuck in Lompoc
