Heat protection

kingsley coach

New member
Mar 5, 2009
2,801
0
0
Netters

It has been brought to my attention that since I've installed headers, my
speedo cable has become vulnerable to damage...and the effects that stem
from that.

What are you using to prevent this type of heat damage? Is there anything
else that requires shielding?

Thanks

Mike in NS

--
Michael Beaton
1977 Kingsley 26-11
1977 Eleganza II 26-3
Antigonish, NS

Life is too short to hold a grudge; slash some tires and call it even !
 
Mike,

Years ago I formed a heat shield from aluminum and mounted it between the
cable and the headers. I don't need it on the Cad500 with iron manifolds,
so I can't tell you what I bolted it to -- but I did. :-)

Ken H.

On Thu, Sep 21, 2017 at 12:11 PM, Kingsley Coach
wrote:

> Netters
>
> It has been brought to my attention that since I've installed headers, my
> speedo cable has become vulnerable to damage...and the effects that stem
> from that.
>
> What are you using to prevent this type of heat damage? Is there anything
> else that requires shielding?
>
> Thanks
>
> Mike in NS
>
>
> --
> Michael Beaton
> 1977 Kingsley 26-11
> 1977 Eleganza II 26-3
> Antigonish, NS
>
> Life is too short to hold a grudge; slash some tires and call it even !
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>