Headers/manifolds in the Phoenix area?
- Thread starter shaun
- Start date
Try the Blacklist but also
Dan Hensley in Apache Jct.
480-671-3941
Dan the rv man
He's on the bdub supplier list
Dennis
> Any chance anyone has any headers or manifolds for a 455 in the Phoenix area? We are on the road and greatly appreciate all advice and/or tips
--
Dennis S
73 Painted Desert 230
Memphis TN Metro
Dan Hensley in Apache Jct.
480-671-3941
Dan the rv man
He's on the bdub supplier list
Dennis
> Any chance anyone has any headers or manifolds for a 455 in the Phoenix area? We are on the road and greatly appreciate all advice and/or tips
--
Dennis S
73 Painted Desert 230
Memphis TN Metro
Shaun,What is wrong with your present installation? Sorry if this is a
repeat question, but I have not been following this thread.
JR WrightMichigan (On location in Tucson)
-----------------------------------------From: "Shaun"
To:
Cc:
Sent: 08-Dec-2017 06:36:54 +0000
Subject: [GMCnet] Headers/manifolds in the Phoenix area?
Any chance anyone has any headers or manifolds for a 455 in the
Phoenix area? We are on the road and greatly appreciate all advice
and/or tips
--
1977 Palm Beach, 455, mostly stock and original
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
/>
repeat question, but I have not been following this thread.
JR WrightMichigan (On location in Tucson)
-----------------------------------------From: "Shaun"
To:
Cc:
Sent: 08-Dec-2017 06:36:54 +0000
Subject: [GMCnet] Headers/manifolds in the Phoenix area?
Any chance anyone has any headers or manifolds for a 455 in the
Phoenix area? We are on the road and greatly appreciate all advice
and/or tips
--
1977 Palm Beach, 455, mostly stock and original
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
/>
I have some and I know BB Pedit has some, we are located in Prescott, AZ
Phone # 928-227-2873
>
> Shaun,What is wrong with your present installation? Sorry if this is a
> repeat question, but I have not been following this thread.
> JR WrightMichigan (On location in Tucson)
>
> -----------------------------------------From: "Shaun"
> To:
> Cc:
> Sent: 08-Dec-2017 06:36:54 +0000
> Subject: [GMCnet] Headers/manifolds in the Phoenix area?
>
> Any chance anyone has any headers or manifolds for a 455 in the
> Phoenix area? We are on the road and greatly appreciate all advice
> and/or tips
> --
> 1977 Palm Beach, 455, mostly stock and original
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
> />
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Phone # 928-227-2873
>
> Shaun,What is wrong with your present installation? Sorry if this is a
> repeat question, but I have not been following this thread.
> JR WrightMichigan (On location in Tucson)
>
> -----------------------------------------From: "Shaun"
> To:
> Cc:
> Sent: 08-Dec-2017 06:36:54 +0000
> Subject: [GMCnet] Headers/manifolds in the Phoenix area?
>
> Any chance anyone has any headers or manifolds for a 455 in the
> Phoenix area? We are on the road and greatly appreciate all advice
> and/or tips
> --
> 1977 Palm Beach, 455, mostly stock and original
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
> />
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Jr-
He found manifolds were leaking. (No gaskets). When installing remflex gasket his passenger side manifold cracked.
He is looking for a "non-cracked" passenger side manifold for a 455
Shaun- installation of headers will take some exhaust cutting/welding to fit the flandge. FYI. Fastest and easiest way is to stick with manifolds
for now.
--
Jon Roche
75 palm beach
St. Cloud, MN
http://lqqkatjon.blogspot.com/
He found manifolds were leaking. (No gaskets). When installing remflex gasket his passenger side manifold cracked.
He is looking for a "non-cracked" passenger side manifold for a 455
Shaun- installation of headers will take some exhaust cutting/welding to fit the flandge. FYI. Fastest and easiest way is to stick with manifolds
for now.
--
Jon Roche
75 palm beach
St. Cloud, MN
http://lqqkatjon.blogspot.com/
How much did he tighten them. Only supposed to be a MAX of 14 FtLbs.
Manifold had to be cracked already to break at such a low torque
value. You retorque them after a few hundred miles to the same value
if they are loose.
JR WrightMichigan (On location in Tucson)
-----------------------------------------From: "Jon Roche"
To:
Cc:
Sent: 08-Dec-2017 18:46:52 +0000
Subject: Re: [GMCnet] Headers/manifolds in the Phoenix area?
Jr-
He found manifolds were leaking. (No gaskets). When installing
remflex gasket his passenger side manifold cracked.
He is looking for a "non-cracked" passenger side manifold for a 455
Shaun- installation of headers will take some exhaust cutting/welding
to fit the flandge. FYI. Fastest and easiest way is to stick with
manifolds
for now.
--
Jon Roche
75 palm beach
St. Cloud, MN
http://lqqkatjon.blogspot.com/
/>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
/>
Manifold had to be cracked already to break at such a low torque
value. You retorque them after a few hundred miles to the same value
if they are loose.
JR WrightMichigan (On location in Tucson)
-----------------------------------------From: "Jon Roche"
To:
Cc:
Sent: 08-Dec-2017 18:46:52 +0000
Subject: Re: [GMCnet] Headers/manifolds in the Phoenix area?
Jr-
He found manifolds were leaking. (No gaskets). When installing
remflex gasket his passenger side manifold cracked.
He is looking for a "non-cracked" passenger side manifold for a 455
Shaun- installation of headers will take some exhaust cutting/welding
to fit the flandge. FYI. Fastest and easiest way is to stick with
manifolds
for now.
--
Jon Roche
75 palm beach
St. Cloud, MN
http://lqqkatjon.blogspot.com/
/>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
/>
Thanks everyone. You're right, the manifold was already cracked, and the Remflex gasket only made it worse. I went ahead and ordered headers and will
attempt to install here in Bullhead City. We have been put up by some amazing GMCers and we feel very fortunate!
--
1977 Palm Beach, 455, mostly stock and original
attempt to install here in Bullhead City. We have been put up by some amazing GMCers and we feel very fortunate!
--
1977 Palm Beach, 455, mostly stock and original
Shaun,
Your header shipped today, so you should receive via UPS Monday afternoon,
I will have our guys track it and advise you.
> Thanks everyone. You're right, the manifold was already cracked, and the
> Remflex gasket only made it worse. I went ahead and ordered headers and will
> attempt to install here in Bullhead City. We have been put up by some
> amazing GMCers and we feel very fortunate!
>
>
> --
> 1977 Palm Beach, 455, mostly stock and original
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Jim Kanomata
Applied/GMC, Newark,CA
jimk
http://www.appliedgmc.com
1-800-752-7502
Your header shipped today, so you should receive via UPS Monday afternoon,
I will have our guys track it and advise you.
> Thanks everyone. You're right, the manifold was already cracked, and the
> Remflex gasket only made it worse. I went ahead and ordered headers and will
> attempt to install here in Bullhead City. We have been put up by some
> amazing GMCers and we feel very fortunate!
>
>
> --
> 1977 Palm Beach, 455, mostly stock and original
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Jim Kanomata
Applied/GMC, Newark,CA
jimk
http://www.appliedgmc.com
1-800-752-7502
You shold have the tracking # as we send that out when it ships.
> Shaun,
> Your header shipped today, so you should receive via UPS Monday afternoon,
> I will have our guys track it and advise you.
>
>
>> Thanks everyone. You're right, the manifold was already cracked, and the
>> Remflex gasket only made it worse. I went ahead and ordered headers and will
>> attempt to install here in Bullhead City. We have been put up by some
>> amazing GMCers and we feel very fortunate!
>>
>>
>> --
>> 1977 Palm Beach, 455, mostly stock and original
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
>
>
>
> --
> Jim Kanomata
> Applied/GMC, Newark,CA
> jimk
> http://www.appliedgmc.com
> 1-800-752-7502
>
--
Jim Kanomata
Applied/GMC, Newark,CA
jimk
http://www.appliedgmc.com
1-800-752-7502
> Shaun,
> Your header shipped today, so you should receive via UPS Monday afternoon,
> I will have our guys track it and advise you.
>
>
>> Thanks everyone. You're right, the manifold was already cracked, and the
>> Remflex gasket only made it worse. I went ahead and ordered headers and will
>> attempt to install here in Bullhead City. We have been put up by some
>> amazing GMCers and we feel very fortunate!
>>
>>
>> --
>> 1977 Palm Beach, 455, mostly stock and original
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
>
>
>
> --
> Jim Kanomata
> Applied/GMC, Newark,CA
> jimk
> http://www.appliedgmc.com
> 1-800-752-7502
>
--
Jim Kanomata
Applied/GMC, Newark,CA
jimk
http://www.appliedgmc.com
1-800-752-7502
