GMC Motorhome Digest V3 #219

[gene]

take a look at my web page. You will see lists of things that should be done

gene

>I just purchased a 76 palm beach and have never own a GMC before. I'm
>planning to retire and do some traveling, but I cannot get the furnace to
>light. I found the air tank had rusted out at the bottom,so I cut it off and
>welded a new one on and that fixed most of the air leaks. I here you folks
>talk about a tool to replace the ?? front wheel bearings,is this a problem
>area? We live in Phoenix, AZ,so all rubber products go bad very fast with
>this heat in the summer. I'm just now going through all the systems to make
>sure they work, any suggestions. Thanks, Mel Brown
>
Genef -- 77PB/ore/ca
GMC MOTORHOME INFORMATION
mr.erf
http://www.california.com/~eagle/

 

[al chernoff]

Mel, there are a number of GMC owners in Phoenix. Tom Bradley has a coach and
has had work done on it so he might be a good source of references. He also
helped me do the new ceiling and it turned out great. Give him a call and he
can advise you. His number is (602) 814-1631.
al

> I just purchased a 76 palm beach and have never own a GMC before. I'm
> planning to retire and do some traveling, but I cannot get the furnace to
> light. I found the air tank had rusted out at the bottom,so I cut it off and
> welded a new one on and that fixed most of the air leaks. I here you folks
> talk about a tool to replace the ?? front wheel bearings,is this a problem
> area? We live in Phoenix, AZ,so all rubber products go bad very fast with
> this heat in the summer. I'm just now going through all the systems to make
> sure they work, any suggestions. Thanks, Mel Brown