GMC gravity fresh water fill cap

[Ron Clark]

Yup, 1 1/4" PVC threaded cap will work. Same threads.
I'd recommend cutting the cap down so it tightens on the tapered threads
of the filler tube or the flat of the tube, rather than on the flat
plastic of the horseshoe shaped mounting plate. Or put some plumbers
grease on the flat part. That baby will be harder than heck to remove if
it's turned down tight on the flat. I tightened my trial piece down
snug with my fingers, and had to use a wrench to get it off.

RonC

Ron & Linda Clark
North Plains, ORYGUN
78 Eleganza II

 

[kingsley coach]

Maybe you just don't know your own strength !

Mike in NS

>
> Yup, 1 1/4" PVC threaded cap will work. Same threads.
> I'd recommend cutting the cap down so it tightens on the tapered threads
> of the filler tube or the flat of the tube, rather than on the flat
> plastic of the horseshoe shaped mounting plate. Or put some plumbers
> grease on the flat part. That baby will be harder than heck to remove if
> it's turned down tight on the flat. I tightened my trial piece down
> snug with my fingers, and had to use a wrench to get it off.
>
> RonC
>
>
> Ron & Linda Clark
> North Plains, ORYGUN
> 78 Eleganza II
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>

--
Michael Beaton
1977 Kingsley 26-11
1977 Eleganza II 26-3
Antigonish, NS

Life is too short to hold a grudge; slash some tires and call it even !