generator

[chris izzig]

i replaced the control board on the generator twice and it still will not start unless i jump 9 & 11 any one have any suggestions what it could be besides the control boards

thanx chris 75 gb

Join 18 million Eudora users by signing up for a free Eudora Web-Mail account at http://www.eudoramail.com

 

[john dolan]

> Let me sip a little Evan Williams 1783 and if it comes back to
> me (my memory, that is) I'll holler back. Lanier

Is that health remedy registered with the FDA, I'm not familiar with it.
Seriously what is it? Don't tell me it is scotch...I just saw some guys,
next to us, drinking a $500 bottle of scotch last week. It created such
a hubbub in the cocktail lounge, none of the regular folks could place
orders, get round of drinks, or pay tabs, since the owner came in and
commandeered all the watresses to pour shots for the rather large table
drinking it. Does Evan Williams have a blue label? ...or is it just an
almanac?

Regards,
John

- --
"I do whatever my Rice Krispies tell me to..."
John said, from inside a 1974 Glacier on the
Potomac, just north of the White House.

 

[chris izzig]

my gen would not start umless i jumped #9 & 11 so i had my board rebuilt. rebuilt board and same problem so i bought a new board. still the same problem anyone with a solution?
thanx chris 75 gb with maiden voyage problems

Join 18 million Eudora users by signing up for a free Eudora Web-Mail account at http://www.eudoramail.com

 

[jim hall]

Chris
I had the same problem with my Onan. I found the two wires going to the
flywheel generator were broken. They have to tie in to the small
flywheel generator to allow the onan to start. I had to jump the same
terminals on mine even with the new board. Fixed the wires and runs
great now. I had to pull flywheel to fix my connections. Thats what I
did. Now I have a spare board for the tool box.

- --
Jim Hall 77PB in Pawleys Island, SC

BELIEVE and SUCCEED