fuel filler hose ID

[RF_Burns]

When I replaced mine about 9 years ago, I think they were an odd-ball size. So I just bought them from Cinnabar. They were not that expensive from my
recollection. I believe Applied has them too.

--
Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC.1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that

 

[Melbo]

I got mine from applied. Everything went together well.

Melbo
--
Albuquerque NM Bus Conversion 1978 MCI 1973 GMC

 

[Jim Hupy]

You have 3 sizes of fuel and vapor carrying hoses on the coach. 1/4" i.d.,
5/16" id., and 3/8 " i.d.
In addition, there are filler hoses and "burp" hose that are various sizes.
Gates "Barricade" hoses have an internal liner of alcohol resistant
material and that might affect exact measurement a bit. Clear as mud, right?
Jim Hupy
Salem, Oregon

On Sat, Dec 14, 2019, 9:00 AM melmull--- via Gmclist <

> I got mine from applied. Everything went together well.
>
> Melbo
> --
> Albuquerque NM Bus Conversion 1978 MCI 1973 GMC
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>

 

[6cuda6]

Got mine from Applied as well....im sure i could have found them locally but i would have had to match them up to different car hoses, cut the
sections out etc and when all is said and done would have cost me more in the end.

The elbow is different id's at each end adding to the problem of finding something that would work.

--
Rich Mondor,

Brockville, ON

77 Hughes 2600

 

[Bruce Hart]

I recently tried to order from my Napa store the 1 1/8" hose that clamps
between the vertical fill tube to the metal pipe that runs horizontally
along the drivers side frame. Not to be found. 1" and 1 1/4" but not 1
1/8"

On Sat, Dec 14, 2019 at 4:10 PM tonka6cuda6--- via Gmclist <

> Got mine from Applied as well....im sure i could have found them locally
> but i would have had to match them up to different car hoses, cut the
> sections out etc and when all is said and done would have cost me more in
> the end.
>
> The elbow is different id's at each end adding to the problem of finding
> something that would work.
>
> --
> Rich Mondor,
>
> Brockville, ON
>
> 77 Hughes 2600
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>

--
Bruce Hart
1976 Palm Beach
Milliken, Co
GMC=Got More Class

 

[Matt Colie]

> Got mine from Applied as well....im sure i could have found them locally but i would have had to match them up to different car hoses, cut the
> sections out etc and when all is said and done would have cost me more in the end.
>
> The elbow is different id's at each end adding to the problem of finding something that would work.

Well Rich,

I have been in the autobiz in Detroit and I could not locate fuel fill hose the correct sizes and shapes. So, don't feel bad.
I bought mine from JimK - too.

Matt
--
Matt & Mary Colie - '73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan
OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Twixt A2 and Detroit

 

[jim kanomata1]

We found that the boat people have hoses, but most had wire support and our
customers did not like them. We have been supplying the hose that fit and
perform as expected.
Nick , Gary and I spend considerable time on the phone to help.
We have the most complete lineup of GMC MH parts in the USA

On Sat, Dec 14, 2019 at 3:10 PM tonka6cuda6--- via Gmclist <

> Got mine from Applied as well....im sure i could have found them locally
> but i would have had to match them up to different car hoses, cut the
> sections out etc and when all is said and done would have cost me more in
> the end.
>
> The elbow is different id's at each end adding to the problem of finding
> something that would work.
>
> --
> Rich Mondor,
>
> Brockville, ON
>
> 77 Hughes 2600
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>

--
Jim Kanomata
Applied/GMC, Newark,CA
jimk
http://www.appliedgmcrvparts.com
1-800-752-7502