Front wheel bearing replacement/maintenance: Tools needed ??

[gene]

Take a look at my web site, I have his phone number up there and some
discussion on how to do the job.

gene

>After purchasing our coach last April, we have put 8000 miles on her. I
>am starting to hear a slight roaring sound under the front passenger
>seat. So,
>
>My next project scheduled for next week is going to be to inspect and
>most likely just replace the front wheel bearing.
>
>The information I need is:
>
>Where do I get the tools sold by Ken Thoma?
>
>
>And, does he sell everything I need to remove the bearings?
>
>
>
>If not what else do I need to obtain?
>
>
>About how much does the tools set cost?
>
>
>Suggestion and help in doing such a job?
>
>
>
>Thanks
>
>Doyle Todd
>
>1977 Transmode
>Harlingen Tx
>
>
>
>
Genef -- 77PB/ore/ca
GMC MOTORHOME INFORMATION
mr.erf
http://www.california.com/~eagle/

 

[doyle todd]

After purchasing our coach last April, we have put 8000 miles on her. I
am starting to hear a slight roaring sound under the front passenger
seat. So,

My next project scheduled for next week is going to be to inspect and
most likely just replace the front wheel bearing.

The information I need is:

Where do I get the tools sold by Ken Thoma?

And, does he sell everything I need to remove the bearings?

If not what else do I need to obtain?

About how much does the tools set cost?

Suggestion and help in doing such a job?

Thanks

Doyle Todd

1977 Transmode
Harlingen Tx

 

[marlene meineken]

Why don't you check with Tom Warner in regards to the Wheel Bearing Puller.
If he has any more it's a deal that can't be beat. Check with Tom here on
the GMCNet. You won't be sorry.

Marlene Meineken
77 PB

- ----- Original Message -----
From: Doyle Todd
To: GMC
Sent: Tuesday, January 11, 2000 11:14 AM
Subject: GMC: Front wheel bearing replacement/maintenance: Tools needed ??

> After purchasing our coach last April, we have put 8000 miles on her. I
> am starting to hear a slight roaring sound under the front passenger
> seat. So,
>
> My next project scheduled for next week is going to be to inspect and
> most likely just replace the front wheel bearing.
>
> The information I need is:
>
> Where do I get the tools sold by Ken Thoma?
>
>
> And, does he sell everything I need to remove the bearings?
>
>
>
> If not what else do I need to obtain?
>
>
> About how much does the tools set cost?
>
>
> Suggestion and help in doing such a job?
>
>
>
> Thanks
>
> Doyle Todd
>
> 1977 Transmode
> Harlingen Tx
>
>
>
>