A report on this forum mentioned with modern grease both grease and bearings
looked new after many thousands of miles.
What is a reasonable inspection interval with the following conditions?
1. Stock front hubs and knuckles in good condition.
2. New style stock wheel bearings
3. Proper clearances and proper assembly using good tools
4. Modern improved grease
5. Neither front wheel will ever be loaded beyond factory ratings.
How about every 100k ?
Are we there yet, with the GMC?
I know it requires some shooting from the hip, but given the above
conditions, how much, if any, stretching of the 30k inspection interval
seems reasonable to you?
Don Miller
Shenandoah Valley of Virginia
looked new after many thousands of miles.
What is a reasonable inspection interval with the following conditions?
1. Stock front hubs and knuckles in good condition.
2. New style stock wheel bearings
3. Proper clearances and proper assembly using good tools
4. Modern improved grease
5. Neither front wheel will ever be loaded beyond factory ratings.
How about every 100k ?
Are we there yet, with the GMC?
I know it requires some shooting from the hip, but given the above
conditions, how much, if any, stretching of the 30k inspection interval
seems reasonable to you?
Don Miller
Shenandoah Valley of Virginia