Front rubber brake line length?

[s-m-h]

After my maiden voyage was delayed due to brake related issues, I've decided to replace the whole system.

New MC, ni-copp lines, prop valve and rubber flex lines. I already replaced the entire rear drum setup with kits (wheel cylinders, springs, pads etc.)
and have new rear flex lines on the way.

The only thing left untouched will be the front rubber flex lines.

Does anyone know the length of these guys? I can remove mine and measure figured some must know.

TIA

Shawn
--
Shawn Harris
North Vancouver,
Canada
1977 Palm Beach 403

 

[powwerjon]

70 or 80MM calipers?

J.R. Wright
GMC Great Laker MHC
GMCGL Tech Editor
GMC Eastern States Charter Member
GMCMI
78 GMC Buskirk 29.5’ Stretch
75 GMC Avion (Under Reconstruction)
Michigan

>
> After my maiden voyage was delayed due to brake related issues, I've decided to replace the whole system.
>
> New MC, ni-copp lines, prop valve and rubber flex lines. I already replaced the entire rear drum setup with kits (wheel cylinders, springs, pads etc.)
> and have new rear flex lines on the way.
>
> The only thing left untouched will be the front rubber flex lines.
>
> Does anyone know the length of these guys? I can remove mine and measure figured some must know.
>
> TIA
>
> Shawn
> --
> Shawn Harris
> North Vancouver,
> Canada
> 1977 Palm Beach 403
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:

 

[s-m-h]

Not sure J.R. Whatever is factory.
--
Shawn Harris
North Vancouver,
Canada
1977 Palm Beach 403