Front ride height adjustment bolt turns/In

[LarryW]

I need to adjust my front ride height up about 1" from the existing 12 1/8" to the speck'd 13 1/8". How many turns on the adjustment bolt for the pork
chop, is equal to 1"?
Thanks
--
Larry
78 Royale w/500 Caddy
Menomonie, WI.

 

[kosier]

Larry,

Approximately six.

Gary Kosier
77PB w/500Cad
Newark, Ohio

--------------------------------------------------
From: "Larry"
Sent: Friday, July 21, 2017 10:16 AM
To:
Subject: [GMCnet] Front ride height adjustment bolt turns/In

> I need to adjust my front ride height up about 1" from the existing 12
> 1/8" to the speck'd 13 1/8". How many turns on the adjustment bolt for the
> pork
> chop, is equal to 1"?
> Thanks
> --
> Larry
> 78 Royale w/500 Caddy
> Menomonie, WI.
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

 

[scott nutter1]

Seems like "6" turns works.
--
Scott Nutter
1978 Royale Center Kitchen, Patterson 455, switch pitch tranny, 3.21 final drive, Quad bags, tankless water heater.
Houston, Texas

 

[Jim Hupy]

Larry, if you wind up needing new torsion bars, contact me. I have 5 sets.
Jim Hupy
Salem, Or.

> Larry,
>
> Approximately six.
>
> Gary Kosier
> 77PB w/500Cad
> Newark, Ohio
>
> --------------------------------------------------
> From: "Larry"
> Sent: Friday, July 21, 2017 10:16 AM
> To:
> Subject: [GMCnet] Front ride height adjustment bolt turns/In
>
> I need to adjust my front ride height up about 1" from the existing 12
>> 1/8" to the speck'd 13 1/8". How many turns on the adjustment bolt for the
>> pork
>> chop, is equal to 1"?
>> Thanks
>> --
>> Larry
>> 78 Royale w/500 Caddy
>> Menomonie, WI.
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>

 

[jim kanomata1]

Be sure and use an Unloader tool, else you'll strip the bolt/square nut.

> Larry, if you wind up needing new torsion bars, contact me. I have 5 sets.
> Jim Hupy
> Salem, Or.
>

>
> > Larry,
> >
> > Approximately six.
> >
> > Gary Kosier
> > 77PB w/500Cad
> > Newark, Ohio
> >
> > --------------------------------------------------
> > From: "Larry"
> > Sent: Friday, July 21, 2017 10:16 AM
> > To:
> > Subject: [GMCnet] Front ride height adjustment bolt turns/In
> >
> > I need to adjust my front ride height up about 1" from the existing 12
> >> 1/8" to the speck'd 13 1/8". How many turns on the adjustment bolt for
> the
> >> pork
> >> chop, is equal to 1"?
> >> Thanks
> >> --
> >> Larry
> >> 78 Royale w/500 Caddy
> >> Menomonie, WI.
> >>
> >> _______________________________________________
> >> GMCnet mailing list
> >> Unsubscribe or Change List Options:
> >> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
> >>
> >
> >
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> > http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
> >
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>

--
Jim Kanomata
Applied/GMC, Newark,CA
jimk
http://www.appliedgmc.com
1-800-752-7502

 

[LarryW]

Thanks all. I thought it was about 6 to the inch, but wanted a confirm. Will be using a Unloader tool for sure, and thanks Jim. If I need bars,
you'll be the first I call.
--
Larry
78 Royale w/500 Caddy
Menomonie, WI.

 

[jim kanomata1]

Larry,
Seldom do we see the height the same on both sides. I learned from Jim
Bounds many years ago a method I call the " TriCycle " method of leveling
the coach.
If interested, call me and I will explain it.

> Thanks all. I thought it was about 6 to the inch, but wanted a confirm.
> Will be using a Unloader tool for sure, and thanks Jim. If I need bars,
> you'll be the first I call.
> --
> Larry
> 78 Royale w/500 Caddy
> Menomonie, WI.
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>

--
Jim Kanomata
Applied/GMC, Newark,CA
jimk
http://www.appliedgmc.com
1-800-752-7502