Fred when I had the transmission rebuilt on my 78 Kingsley they used a vent
from a GMC #350 transmission that has a 90 degree bend in it and can be
installed without removing the transmission. Then use a rubber hose to run
out into the fender well. thats what they did.
Tim & Cass Jones
Portland, OR
78 Kingsley
from a GMC #350 transmission that has a 90 degree bend in it and can be
installed without removing the transmission. Then use a rubber hose to run
out into the fender well. thats what they did.
Tim & Cass Jones
Portland, OR
78 Kingsley
