Floor insulation question

[s-m-h]

Just a quick update...I ended up buying 2" and spitting down the middle. I'm glad i did because this stuff does not compress much at all! I used a 24"
english bow saw with my wife ensuring i was staying straight on the far end. Easy as pie. Cuts like a dream. Mold proof, fire resistant and rigid. If
there is a better product for this application, I would be surprised.

The pack comes with 6 sheets so 12 in half. I'll update if that does the whole floor. I suspect I'll need one or two extra sheets unfortunately. We
shall see. Too much of a PITA to upload photos or I would.
--
Shawn Harris
North Vancouver,
Canada
1977 Palm Beach 403

 

[Rich Kinas]

So you ended up with 1" thick slabs, just to make sure I am following you.
I am just trying ti finish up my front end rebuild to finally get onto the
floors. Do you think the 1 1/2 " would be too thick?

Thanks,

Rich

On Tue, Apr 14, 2020 at 11:28 PM Shawn Harris via Gmclist <

> Just a quick update...I ended up buying 2" and spitting down the middle.
> I'm glad i did because this stuff does not compress much at all! I used a
> 24"
> english bow saw with my wife ensuring i was staying straight on the far
> end. Easy as pie. Cuts like a dream. Mold proof, fire resistant and rigid.
> If
> there is a better product for this application, I would be surprised.
>
> The pack comes with 6 sheets so 12 in half. I'll update if that does the
> whole floor. I suspect I'll need one or two extra sheets unfortunately. We
> shall see. Too much of a PITA to upload photos or I would.
> --
> Shawn Harris
> North Vancouver,
> Canada
> 1977 Palm Beach 403
>
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>