Figured out how to mount a really nice, big remote air filter in a GMC.

[Bob Dunahugh]

Need to pick up some aluminum tomorrow to fabricate the frame mounted support bracket for the filter body. Also came up with a way to have 4" galvanized intake, and out ports. In this way I can install 4" rubberized ducts to the engine, and grill mounted cold air scoop. I'll have photos hopefully by Thursday. Can I send the photos to someone to post here? Bob Dunahugh 78 Royale

 

[bdub1]

Bob, you've already got a couple of albums at gmcmhphotos.com. Just send them
to me and they'll get posted. Be sure to include captions for each photo if
needed. Year and model of donor vehicles at the mall would be nice as well.

Thanks
bdub

-----Original Message-----
From: Gmclist On Behalf Of Bob Dunahugh
Sent: Monday, February 20, 2017 12:05 AM

Need to pick up some aluminum tomorrow to fabricate the frame mounted support
bracket for the filter body. Also came up with a way to have 4" galvanized
intake, and out ports. In this way I can install 4" rubberized ducts to the
engine, and grill mounted cold air scoop. I'll have photos hopefully by
Thursday. Can I send the photos to someone to post here?

 

[slc]

I need to replace the jerry rigged air cleaner on my unit.
I have found what will work as the cap and will get the tubes to go to the filters.
The oem air cleaner throat is only about 1.5 inch in diameter. Is that about what
you are figuring also?
Would like to see what you have come up with for the filters as well.
Thanks.
--
GatsbysCruise. 74GMC Glacier Model.

 

[jim kanomata1]

Go to our site and get some ideas.
Look under Engine/Ignition

> I need to replace the jerry rigged air cleaner on my unit.
> I have found what will work as the cap and will get the tubes to go to the
> filters.
> The oem air cleaner throat is only about 1.5 inch in diameter. Is that
> about what
> you are figuring also?
> Would like to see what you have come up with for the filters as well.
> Thanks.
> --
> GatsbysCruise. 74GMC Glacier Model.
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>

--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk
http://www.appliedgmc.com
1-800-752-7502