Dual Vacuum Brake Booster

[Tom Katzenberger]

Hello all,

Does anyone know the part number for the brake booster that allows 2 vacuum sources?

Thanks,
Tom
--
Tom & Oki Katzenberger,
Kingsville, Maryland,
1977 23' Birchaven, 455 C.I.D.

 

[kmorefield]

You might consider contacting Dave Lenzi. He sells the "sensitized" brake booster that allows for two vacuum sources, along with vacuum pumps. He
will take your old booster as a core. If you get a new master cylinder, you will need to have the push rod machined to fit the master cylinder
correctly. Dave does all of this, for a reasonable price. I believe he is a member of this forum.

Ken
--
1975 - 26’ Eleganza II
Unsure of what upgrades may have been done. I'm working on sorting that out in the coming months.
Ken Morefield - Redding, CA

 

[Matt Colie]

> Hello all,
> Does anyone know the part number for the brake booster that allows 2 vacuum sources?
> Thanks,
> Tom

Tom,

You could also buy just the part that Dave calls a vacuum manifold. I don't know if he sells them alone and not part of a kit. I know that his price
for them is too low. I know this because I carefully costed them out when he told me. Then I tried to make one just to be sure. Did you happen to
notice I'm not selling them??

Matt
--
Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit

 

[Tom Katzenberger]

Thank you Ken and Matt,

I will find out what master cylinder came with the 6 wheel disc brake system I got from Applied and then call Dave. I appreciate your guys input! Big
help.

Take care,
Tom
--
Tom & Oki Katzenberger,
Kingsville, Maryland,
1977 23' Birchaven, 455 C.I.D.