Direct Injection

[nate chase]

Sorry, no go. I have that on my Caspro engin and I need a doghouse (or go
with no air cleaner and about 1/2" of clearance and that gets you one hell
of a howl!).

Nate '75GB (I am about EKE'd out) Omaha

>
Date: 7 Jun 2000 17:28:06 -0000
From: tom warner
Subject: Re: GMC: Direct Injection

I think the edelbrock manifold could be
used wtih the OE floor but would
need to actually check it.

 

[emerystora]

>Remember you have a throttle body in place of the quadrajet. There is no
>such animal where the quadrajet used to set when you install port or direct
injection.

Tom - wouldn't you still have an air throttle body or throttle plate
to control the amount of air entering the engine? I know that my car
has a Holley throttle valve that controls the air even though it also
has the fuel with eight separate injectors.

Emery Stora
77 Kingsley
Santa Fe, NM

 

[darren paget]

Nate. If you haven't found one yet, give Marcus a call. He has a raised cover
that won't work for him. Darren

> Sorry, no go. I have that on my Caspro engin and I need a doghouse (or go
> with no air cleaner and about 1/2" of clearance and that gets you one hell
> of a howl!).
>
> Nate '75GB (I am about EKE'd out) Omaha
>
> >
> Date: 7 Jun 2000 17:28:06 -0000
> From: tom warner
> Subject: Re: GMC: Direct Injection
>
> I think the edelbrock manifold could be
> used wtih the OE floor but would
> need to actually check it.

- --
Darren Paget
76 Experimental
Another Fab Day
http://www.TZEplus.com