Dinette

[adolph santorine]

I’m planning on Re-installing the front dinette (Palm Beach)

There appear to be flanges that would bolt into the engine house step.

Are there T-Nuts in there to accept a bolt?

I don’t remember from when I took them out.

Right now it’s covered in dyna-mat, mass loaded vinyl and carpet, which is why I’m asking before I tear into it.

Thanks.

Dolph Santorine

DE AD0LF

Wheeling, West Virginia

1977 ex-Palm Beach TZE167V100820
Howell EFI/EBL , Reaction Arms, Manny Transmission

 

[johnny]

Mine just has big lag bolts into thye plywood.

--johnny
--
Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
I forgive them all, save those who hurt the dogs. They must answer to me in hell

 

[Will Albers]

same

On Sun, Jul 7, 2019 at 7:21 PM Johnny Bridges via Gmclist <

> Mine just has big lag bolts into thye plywood.
>
> --johnny
> --
> Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons.
> Braselton, Ga.
> I forgive them all, save those who hurt the dogs. They must answer to me
> in hell
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>

 

[Carl Stouffer]

Yeah, pretty sure it is held in by 1/4" or 5/15" lag screws.
--
Carl Stouffer
'75 ex Palm Beach
Tucson, AZ.
Chuck Aulgur Reaction Arm Disc Brakes, Quadrabags, 3.70 LSD final drive, Lenzi knuckles/hubs, Dodge Truck 16" X 8" front wheels, Rear American Eagles,
Solar battery charging. GMCSJ and GMCMI member

 

[LarryW]

Mine are 3/8 lag bolts 2" long into the plywood. I opened it up and reinforced under the plywood with a piece of 2 X 4 so the lags had some meat to
bite into.JWID.
--
Larry
78 Royale w/500 Caddy
Menomonie, WI.

 

[Tom Lins]

Same here - Lag screws
--
Tom Lins
St Augustine, FL
77 GM Rear Twin, Dry Bath, 455, FI-Tech EFI
Manuals on DVD
http://www.bdub.net/tomlins/

 

[adolph santorine]

So it’s just the seat belts that use bolts into the aluminum structure?

Dolph Santorine

DE AD0LF

Wheeling, West Virginia

1977 ex-Palm Beach TZE167V100820
Howell EFI/EBL , Reaction Arms, Manny Transmission

>
> Same here - Lag screws
> --
> Tom Lins
> St Augustine, FL
> 77 GM Rear Twin, Dry Bath, 455, FI-Tech EFI
> Manuals on DVD
> http://www.bdub.net/tomlins/
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

 

[johnny]

Yes, just the belts since the need to hold a lot of pull in a crash.

--johnny

Do. Or, do not. There is no 'try'.--Yoda
--
Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
I forgive them all, save those who hurt the dogs. They must answer to me in hell