Cylinder Heads
- Thread starter voyager
- Start date
Yup. Exhaust ports go out.
With that out of the way, check for the accessory mounting bosses for the AC
and alternator. They go on the front, and there are probably none on the
back of the heads.
Mark
> -----Original Message-----
> From: owner-gmcmotorhome
> [mailto
wner-gmcmotorhome]On Behalf Of Rob Teed
> Sent: Friday, February 05, 1999 7:45 PM
> To: Gmcmotorhome Org
> Subject: Re:GMC: Cylinder Heads
>
>
> I have a 455cid motor in my 74 GMC. I just had the heads redone. Getting
> ready to put them back on. Is there a Right and a left? I cant see a
> diffrence
> between the two.
> Thanks,
> Rob Teed 74 Painted Desert
>
With that out of the way, check for the accessory mounting bosses for the AC
and alternator. They go on the front, and there are probably none on the
back of the heads.
Mark
> -----Original Message-----
> From: owner-gmcmotorhome
> [mailto
wner-gmcmotorhome]On Behalf Of Rob Teed> Sent: Friday, February 05, 1999 7:45 PM
> To: Gmcmotorhome Org
> Subject: Re:GMC: Cylinder Heads
>
>
> I have a 455cid motor in my 74 GMC. I just had the heads redone. Getting
> ready to put them back on. Is there a Right and a left? I cant see a
> diffrence
> between the two.
> Thanks,
> Rob Teed 74 Painted Desert
>
The accessory mounting bosses are on both ends.
Guess it won't matter which side I put them.
Thanks,
Rob Teed
> -----Original Message-----
> From: owner-gmcmotorhome
> [mailtowner-gmcmotorhome]On Behalf Of Mark Grady
> Sent: Friday, February 05, 1999 7:50 PM
> To: gmcmotorhome
> Subject: RE: GMC: Cylinder Heads
>
>
> Yup. Exhaust ports go out.
>
> With that out of the way, check for the accessory mounting bosses
> for the AC
> and alternator. They go on the front, and there are probably none on the
> back of the heads.
>
> Mark
>
>
Guess it won't matter which side I put them.
Thanks,
Rob Teed
> -----Original Message-----
> From: owner-gmcmotorhome
> [mailto
wner-gmcmotorhome]On Behalf Of Mark Grady> Sent: Friday, February 05, 1999 7:50 PM
> To: gmcmotorhome
> Subject: RE: GMC: Cylinder Heads
>
>
> Yup. Exhaust ports go out.
>
> With that out of the way, check for the accessory mounting bosses
> for the AC
> and alternator. They go on the front, and there are probably none on the
> back of the heads.
>
> Mark
>
>
Same part number for both left and right in the parts book.
Ted Schurman
73 Glacier VA
>
> The accessory mounting bosses are on both ends.
> Guess it won't matter which side I put them.
> Thanks,
> Rob Teed
Ted Schurman
73 Glacier VA
>
> The accessory mounting bosses are on both ends.
> Guess it won't matter which side I put them.
> Thanks,
> Rob Teed
Thanks Ted.
Thats great info. I was afraid I would put them on wrong and
mess something up.
Rob Teed
> -----Original Message-----
> From: owner-gmcmotorhome
> [mailtowner-gmcmotorhome]On Behalf Of Ted Schurman
> Sent: Saturday, February 06, 1999 4:48 PM
> To: gmcmotorhome
> Subject: Re: GMC: Cylinder Heads
>
>
> Same part number for both left and right in the parts book.
> Ted Schurman
> 73 Glacier VA
>
> >
> > The accessory mounting bosses are on both ends.
> > Guess it won't matter which side I put them.
> > Thanks,
> > Rob Teed
>
Thats great info. I was afraid I would put them on wrong and
mess something up.
Rob Teed
> -----Original Message-----
> From: owner-gmcmotorhome
> [mailto
wner-gmcmotorhome]On Behalf Of Ted Schurman> Sent: Saturday, February 06, 1999 4:48 PM
> To: gmcmotorhome
> Subject: Re: GMC: Cylinder Heads
>
>
> Same part number for both left and right in the parts book.
> Ted Schurman
> 73 Glacier VA
>
> >
> > The accessory mounting bosses are on both ends.
> > Guess it won't matter which side I put them.
> > Thanks,
> > Rob Teed
>
Rob,
Be sure your tapped & threaded holes for your pump mounts etc. are foreward
and bolt em up.
Hope this helps,
Jim Bounds
- -----------------
>I have a 455cid motor in my 74 GMC. I just had the heads redone. Getting
> ready to put them back on. Is there a Right and a left? I cant see a
>diffrence
> between the two.
>Thanks,
> Rob Teed 74 Painted Desert
>
>
>
Jim Bounds/Co-op Motor Works Orlando www.gmccoop.com
Be sure your tapped & threaded holes for your pump mounts etc. are foreward
and bolt em up.
Hope this helps,
Jim Bounds
- -----------------
>I have a 455cid motor in my 74 GMC. I just had the heads redone. Getting
> ready to put them back on. Is there a Right and a left? I cant see a
>diffrence
> between the two.
>Thanks,
> Rob Teed 74 Painted Desert
>
>
>
Jim Bounds/Co-op Motor Works Orlando www.gmccoop.com
Thanks Jim...either end has the boltholes . Guess there reversible.
> -----Original Message-----
> From: owner-gmcmotorhome
> [mailtowner-gmcmotorhome]On Behalf Of Jim Bounds
> Sent: Thursday, February 11, 1999 12:26 PM
> To: gmcmotorhome
> Subject: Re:GMC: Cylinder Heads
>
>
> Rob,
> Be sure your tapped & threaded holes for your pump mounts etc.
> are foreward
> and bolt em up.
>
> Hope this helps,
> Jim Bounds
> -----------------
> >I have a 455cid motor in my 74 GMC. I just had the heads redone. Getting
> > ready to put them back on. Is there a Right and a left? I cant see a
> >diffrence
> > between the two.
> >Thanks,
> > Rob Teed 74 Painted Desert
> >
> >
> >
> Jim Bounds/Co-op Motor Works Orlando www.gmccoop.com
>
> -----Original Message-----
> From: owner-gmcmotorhome
> [mailto
wner-gmcmotorhome]On Behalf Of Jim Bounds> Sent: Thursday, February 11, 1999 12:26 PM
> To: gmcmotorhome
> Subject: Re:GMC: Cylinder Heads
>
>
> Rob,
> Be sure your tapped & threaded holes for your pump mounts etc.
> are foreward
> and bolt em up.
>
> Hope this helps,
> Jim Bounds
> -----------------
> >I have a 455cid motor in my 74 GMC. I just had the heads redone. Getting
> > ready to put them back on. Is there a Right and a left? I cant see a
> >diffrence
> > between the two.
> >Thanks,
> > Rob Teed 74 Painted Desert
> >
> >
> >
> Jim Bounds/Co-op Motor Works Orlando www.gmccoop.com
>
