>
> Does anyone have a better alternative than the clamps that come with the CV
> boots??
> Some of us have had problems keeping them on. Also, is there one available
> that can be replaced without removing the joint, boot, etc.
> Lanier
Lanier,
Ditch the "pinch-type" clamps. You need the "wind-up" clamps that are
installed with a torque wrench, like the ones illustrated in the service
manual. I had a hard time finding them - finally went to a driveshaft
shop. Some people recommend "double-wrapping" them, which mean you need
to buy really long ones for the outboard end of the boot. I understand
that you can buy the strap material and the clips separately and make
them any length you want. Haven't found a source for that yet.
Patrick
- --
Patrick Flowers
Mailto
atri63
The GMC Motorhome Page
http://www.gmcmotorhome.com
> Does anyone have a better alternative than the clamps that come with the CV
> boots??
> Some of us have had problems keeping them on. Also, is there one available
> that can be replaced without removing the joint, boot, etc.
> Lanier
Lanier,
Ditch the "pinch-type" clamps. You need the "wind-up" clamps that are
installed with a torque wrench, like the ones illustrated in the service
manual. I had a hard time finding them - finally went to a driveshaft
shop. Some people recommend "double-wrapping" them, which mean you need
to buy really long ones for the outboard end of the boot. I understand
that you can buy the strap material and the clips separately and make
them any length you want. Haven't found a source for that yet.
Patrick
- --
Patrick Flowers
Mailto
The GMC Motorhome Page
http://www.gmcmotorhome.com