Curious parts question

B

Bob Dunahugh

New member
Sep 17, 2012
2,784
4
3
I had lots of parts. Put some of them on this site. Almost no bights. Then back last Summer I started posting things for free. ( There was a guy from Canada that I was to send an EFI harness too. I can't fine his e-mail. If he sees this . Contact me again.) That got more interest. Still not much. Then I got monitored on this site. Not a big deal. So I just quit posting all together. Went to posting back privately. I'll still post alittle here. But very limited. Lost interest. Moved on. Need to mind my own business. As to the parts. I just hauled most of the parts to Marion Iron. Two bright sides to this. 1. Got cash for the scrap. 2. Stuffs gone. Sill have some really nice rear brake drums. FREE. Those are going in the next load. Have 2 rebuilt GMC trans on hand. For someone that has a problem on the road in my area. That hasn't worked out well. So I sold one. One more to go. Being a free warehouse isn't fun anymore.
There's a 77 GMC that's about a mile from me on a farm. Lots of great parts. Our fix it up. And use it. It's down to $900. Here in Iowa. Be great for parts. I have the room to part it out. But I have ZERO interest in it.
So here I am. Butting in gain.
Bob Dunahugh
4 COPO Yenkos
78 Royale
A restored convertible collection
 
Just sent you a PM Bob

> I had lots of parts. Put some of them on this site. Almost no bights. Then back last Summer I started posting things for free. ( There was a guy
> from Canada that I was to send an EFI harness too. I can't fine his e-mail. If he sees this . Contact me again.) That got more interest. Still not
> much. Then I got monitored on this site. Not a big deal. So I just quit posting all together. Went to posting back privately. I'll still post
> alittle here. But very limited. Lost interest. Moved on. Need to mind my own business. As to the parts. I just hauled most of the parts to Marion
> Iron. Two bright sides to this. 1. Got cash for the scrap. 2. Stuffs gone. Sill have some really nice rear brake drums. FREE. Those are going in
> the next load. Have 2 rebuilt GMC trans on hand. For someone that has a problem on the road in my area. That hasn't worked out well. So I sold one.
> One more to go. Being a free warehouse isn't fun anymore.
> There's a 77 GMC that's about a mile from me on a farm. Lots of great parts. Our fix it up. And use it. It's down to $900. Here in Iowa. Be
> great for parts. I have the room to part it out. But I have ZERO interest in it.
> So here I am. Butting in gain.
> Bob Dunahugh
> 4 COPO Yenkos
> 78 Royale
> A restored convertible collection
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

--
Rich Mondor,

Brockville, ON

77 Hughes 2600
 
I could be wrong but I think Bob is on the email net and does not use the GMCforum "web" site at all.
--
Tom Lins
St Augustine, FL
77 GM Rear Twin, Dry Bath, 455, Aluminum Radiator Quad-Bag Suspension Solar Panel
Manuals on DVD
GMC Dealer Training Tapes
http://www.bdub.net/tomlins/
 
How do i get ahold of him Tom?

> I could be wrong but I think Bob is on the email net and does not use the GMCforum "web" site at all.

--
Rich Mondor,

Brockville, ON

77 Hughes 2600
 
Dig his email out of his post and email him.

Bob came through for me when I needed a rear hub with a good bearing
installed in it.

GMCRECS, as I recall, tried this business model for a while, but used stuff
is risky, and prices for it often don’t reflect the cost of recovery.

Rick “thinking the informal club-based parts networks and GMCnet usually
come through at time of need” Denney

On Tue, Dec 31, 2019 at 4:49 PM tonka6cuda6--- via Gmclist <

> How do i get ahold of him Tom?
>

> > I could be wrong but I think Bob is on the email net and does not use
> the GMCforum "web" site at all.
>
>
> --
> Rich Mondor,
>
> Brockville, ON
>
> 77 Hughes 2600
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
'73 X-Glacier 230 "Jaws"
Northern Virginia
Offlist email: rick at rickdenney dot com
 
Either your seeing something im not or you have a different user level then me or something as i dont see his email listed anywhere.

> Dig his email out of his post and email him.
>
> Bob came through for me when I needed a rear hub with a good bearing
> installed in it.
>
> GMCRECS, as I recall, tried this business model for a while, but used stuff
> is risky, and prices for it often don't reflect the cost of recovery.
>
> Rick "thinking the informal club-based parts networks and GMCnet usually
> come through at time of need" Denney
>
> On Tue, Dec 31, 2019 at 4:49 PM tonka6cuda6--- via Gmclist <

>
> > How do i get ahold of him Tom?
> >

> >> I could be wrong but I think Bob is on the email net and does not use
> > the GMCforum "web" site at all.
> >
> >
> > --
> > Rich Mondor,
> >
> > Brockville, ON
> >
> > 77 Hughes 2600
> >
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> > http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
> >
> --
> '73 X-Glacier 230 "Jaws"
> Northern Virginia
> Offlist email: rick at rickdenney dot com
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

--
Rich Mondor,

Brockville, ON

77 Hughes 2600
 
If you guys would join the GMC International you might learn to call
people. Membership is not that high and the benefits are great.
Also learn to contact the suppliers like us as we know a lot , plus we know
the main players in the community that know.
Wake up people.

On Tue, Dec 31, 2019 at 2:15 PM tonka6cuda6--- via Gmclist <

> Either your seeing something im not or you have a different user level
> then me or something as i dont see his email listed anywhere.
>

> > Dig his email out of his post and email him.
> >
> > Bob came through for me when I needed a rear hub with a good bearing
> > installed in it.
> >
> > GMCRECS, as I recall, tried this business model for a while, but used
> stuff
> > is risky, and prices for it often don't reflect the cost of recovery.
> >
> > Rick "thinking the informal club-based parts networks and GMCnet usually
> > come through at time of need" Denney
> >
> > On Tue, Dec 31, 2019 at 4:49 PM tonka6cuda6--- via Gmclist <

> >
> > > How do i get ahold of him Tom?
> > >

> > >> I could be wrong but I think Bob is on the email net and does not use
> > > the GMCforum "web" site at all.
> > >
> > >
> > > --
> > > Rich Mondor,
> > >
> > > Brockville, ON
> > >
> > > 77 Hughes 2600
> > >
> > > _______________________________________________
> > > GMCnet mailing list
> > > Unsubscribe or Change List Options:
> > > http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
> > >
> > --
> > '73 X-Glacier 230 "Jaws"
> > Northern Virginia
> > Offlist email: rick at rickdenney dot com
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> > http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
>
> --
> Rich Mondor,
>
> Brockville, ON
>
> 77 Hughes 2600
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>

--
Jim Kanomata
Applied/GMC, Newark,CA
jimk
http://www.appliedgmcrvparts.com
1-800-752-7502
 
Jim i know your a very giving person and love to help which i know is a very rare thing these days but im trying to save my phone calls or visits
[when im in CA] for when i absolutely need to bug you.....as for using the phone itself, well, when you work like i do or keep hours like i do, i
usually dont call anyone [i work anytime 24/7 and change time zones every week so i actually have to plan to phone people]

There will come a day though, i can assure you....lol.

> If you guys would join the GMC International you might learn to call
> people. Membership is not that high and the benefits are great.
> Also learn to contact the suppliers like us as we know a lot , plus we know
> the main players in the community that know.
> Wake up people.
>
> On Tue, Dec 31, 2019 at 2:15 PM tonka6cuda6--- via Gmclist <

>
> > Either your seeing something im not or you have a different user level
> > then me or something as i dont see his email listed anywhere.
> >

> >> Dig his email out of his post and email him.
> >>
> >> Bob came through for me when I needed a rear hub with a good bearing
> >> installed in it.
> >>
> >> GMCRECS, as I recall, tried this business model for a while, but used
> > stuff
> >> is risky, and prices for it often don't reflect the cost of recovery.
> >>
> >> Rick "thinking the informal club-based parts networks and GMCnet usually
> >> come through at time of need" Denney
> >>

> >>
> >>> How do i get ahold of him Tom?
> >>>

> >>>> I could be wrong but I think Bob is on the email net and does not use
> >>> the GMCforum "web" site at all.
> >>>
> >>>
> >>> --
> >>> Rich Mondor,
> >>>
> >>> Brockville, ON
> >>>
> >>> 77 Hughes 2600
> >>>
> >>> _______________________________________________
> >>> GMCnet mailing list
> >>> Unsubscribe or Change List Options:
> >>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
> >>>
> >> --
> >> '73 X-Glacier 230 "Jaws"
> >> Northern Virginia
> >> Offlist email: rick at rickdenney dot com
> >> _______________________________________________
> >> GMCnet mailing list
> >> Unsubscribe or Change List Options:
> >> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
> >
> >
> > --
> > Rich Mondor,
> >
> > Brockville, ON
> >
> > 77 Hughes 2600
> >
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> > http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
> >
>
>
> --
> Jim Kanomata
> Applied/GMC, Newark,CA
> jimk
> http://www.appliedgmcrvparts.com
> 1-800-752-7502
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

--
Rich Mondor,

Brockville, ON

77 Hughes 2600
 
I’m available on the phone from 7:00am-10pmMon-Sat and Sun 10-10

On Tue, Dec 31, 2019 at 5:32 PM tonka6cuda6--- via Gmclist <

> Jim i know your a very giving person and love to help which i know is a
> very rare thing these days but im trying to save my phone calls or visits
> [when im in CA] for when i absolutely need to bug you.....as for using the
> phone itself, well, when you work like i do or keep hours like i do, i
> usually dont call anyone [i work anytime 24/7 and change time zones every
> week so i actually have to plan to phone people]
>
> There will come a day though, i can assure you....lol.
>
>
>

> > If you guys would join the GMC International you might learn to call
> > people. Membership is not that high and the benefits are great.
> > Also learn to contact the suppliers like us as we know a lot , plus we
> know
> > the main players in the community that know.
> > Wake up people.
> >
> > On Tue, Dec 31, 2019 at 2:15 PM tonka6cuda6--- via Gmclist <

> >
> > > Either your seeing something im not or you have a different user level
> > > then me or something as i dont see his email listed anywhere.
> > >

> > >> Dig his email out of his post and email him.
> > >>
> > >> Bob came through for me when I needed a rear hub with a good bearing
> > >> installed in it.
> > >>
> > >> GMCRECS, as I recall, tried this business model for a while, but used
> > > stuff
> > >> is risky, and prices for it often don't reflect the cost of recovery.
> > >>
> > >> Rick "thinking the informal club-based parts networks and GMCnet
> usually
> > >> come through at time of need" Denney
> > >>
> > >> On Tue, Dec 31, 2019 at 4:49 PM tonka6cuda6--- via Gmclist >

> > >>
> > >>> How do i get ahold of him Tom?
> > >>>

> > >>>> I could be wrong but I think Bob is on the email net and does not
> use
> > >>> the GMCforum "web" site at all.
> > >>>
> > >>>
> > >>> --
> > >>> Rich Mondor,
> > >>>
> > >>> Brockville, ON
> > >>>
> > >>> 77 Hughes 2600
> > >>>
> > >>> _______________________________________________
> > >>> GMCnet mailing list
> > >>> Unsubscribe or Change List Options:
> > >>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
> > >>>
> > >> --
> > >> '73 X-Glacier 230 "Jaws"
> > >> Northern Virginia
> > >> Offlist email: rick at rickdenney dot com
> > >> _______________________________________________
> > >> GMCnet mailing list
> > >> Unsubscribe or Change List Options:
> > >> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
> > >
> > >
> > > --
> > > Rich Mondor,
> > >
> > > Brockville, ON
> > >
> > > 77 Hughes 2600
> > >
> > > _______________________________________________
> > > GMCnet mailing list
> > > Unsubscribe or Change List Options:
> > > http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
> > >
> >
> >
> > --
> > Jim Kanomata
> > Applied/GMC, Newark,CA
> > jimk
> > http://www.appliedgmcrvparts.com
> > 1-800-752-7502
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> > http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
>
> --
> Rich Mondor,
>
> Brockville, ON
>
> 77 Hughes 2600
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Jim Kanomata
Applied/GMC, Newark,CA
jimk
http://www.appliedgmcrvparts.com
1-800-752-7502
 
What I saw is yenko108

Rick “who isn’t using the forum” Denney

On Tue, Dec 31, 2019 at 5:15 PM tonka6cuda6--- via Gmclist <

> Either your seeing something im not or you have a different user level
> then me or something as i dont see his email listed anywhere.
>

> > Dig his email out of his post and email him.
> >
> > Bob came through for me when I needed a rear hub with a good bearing
> > installed in it.
> >
> > GMCRECS, as I recall, tried this business model for a while, but used
> stuff
> > is risky, and prices for it often don't reflect the cost of recovery.
> >
> > Rick "thinking the informal club-based parts networks and GMCnet usually
> > come through at time of need" Denney
> >
> > On Tue, Dec 31, 2019 at 4:49 PM tonka6cuda6--- via Gmclist <

> >
> > > How do i get ahold of him Tom?
> > >

> > >> I could be wrong but I think Bob is on the email net and does not use
> > > the GMCforum "web" site at all.
> > >
> > >
> > > --
> > > Rich Mondor,
> > >
> > > Brockville, ON
> > >
> > > 77 Hughes 2600
> > >
> > > _______________________________________________
> > > GMCnet mailing list
> > > Unsubscribe or Change List Options:
> > > http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
> > >
> > --
> > '73 X-Glacier 230 "Jaws"
> > Northern Virginia
> > Offlist email: rick at rickdenney dot com
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> > http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
>
> --
> Rich Mondor,
>
> Brockville, ON
>
> 77 Hughes 2600
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
'73 X-Glacier 230 "Jaws"
Northern Virginia
Offlist email: rick at rickdenney dot com
 
Thanks Rick.

> What I saw is yenko108
>
> Rick "who isn't using the forum" Denney
>
> On Tue, Dec 31, 2019 at 5:15 PM tonka6cuda6--- via Gmclist <

>
> > Either your seeing something im not or you have a different user level
> > then me or something as i dont see his email listed anywhere.
> >

> >> Dig his email out of his post and email him.
> >>
> >> Bob came through for me when I needed a rear hub with a good bearing
> >> installed in it.
> >>
> >> GMCRECS, as I recall, tried this business model for a while, but used
> > stuff
> >> is risky, and prices for it often don't reflect the cost of recovery.
> >>
> >> Rick "thinking the informal club-based parts networks and GMCnet usually
> >> come through at time of need" Denney
> >>

> >>
> >>> How do i get ahold of him Tom?
> >>>

> >>>> I could be wrong but I think Bob is on the email net and does not use
> >>> the GMCforum "web" site at all.
> >>>
> >>>
> >>> --
> >>> Rich Mondor,
> >>>
> >>> Brockville, ON
> >>>
> >>> 77 Hughes 2600
> >>>
> >>> _______________________________________________
> >>> GMCnet mailing list
> >>> Unsubscribe or Change List Options:
> >>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
> >>>
> >> --
> >> '73 X-Glacier 230 "Jaws"
> >> Northern Virginia
> >> Offlist email: rick at rickdenney dot com
> >> _______________________________________________
> >> GMCnet mailing list
> >> Unsubscribe or Change List Options:
> >> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
> >
> >
> > --
> > Rich Mondor,
> >
> > Brockville, ON
> >
> > 77 Hughes 2600
> >
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> > http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
> >
> --
> '73 X-Glacier 230 "Jaws"
> Northern Virginia
> Offlist email: rick at rickdenney dot com
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

--
Rich Mondor,

Brockville, ON

77 Hughes 2600
 
Bob,
I believe I am the Canadian guy you are looking for. We talked back in October and I sent a couple of emails, but they must be going to your email
junk folder.

I have sent you another email. If you don't receive my email, look for it in your junk folder.

Thanks

--
Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC.1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that
 
You must log in or register to reply here.
Applied GMC
GMCMI Fall 2026 Rally

Share this page

Share this page
Top Bottom
Back